![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
These are both promising products, but they are very different.
I've done a fair amount of research on the least toxic ways to prep and paint aluminum, and I have never seen anything like Prekote. It's not a paint, and it's not a conversion coating, it's more like a detergent with a residual film. Note that the scrubbing is not to "penetrate the pores", it's to mechanically break down the existing oxide coat. I plan on trying this on my long-term exposure test piece. It MUST be top coated with a true primer and presumably a finish coat. The Coretec product looks like a waterborne version of long-existing "Wash Primers". It's closer to a paint product, in that it forms a "cured" film. A nice, low-impact product, but it's not as revolutionary as the Prekote credibly seems to be. Thanks to both of you for sharing these leads with us. |
#2
|
|||
|
|||
![]()
I just made arrangements to get a gallon of Prekote to test. I'll
post my experience here. Pantheon is interested in the Experimental airplane market. Craig |
Thread Tools | |
Display Modes | |
|
|