A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

CFI without commercial?



 
 
Thread Tools Display Modes
  #1  
Old March 4th 05, 07:27 PM
Montblack
external usenet poster
 
Posts: n/a
Default

("Dudley Henriques" wrote)
snip
Let me put it this way. You can be technically right. Montblank can be
technically right. But I will avoid both of you in any post I make on
Usenet because you are playing games with my name under a pedantic litany
of technicality that involves something I believe the average reader would
miss when reading something attributed to me that I did not say.
It's THAT simple!
In my opinion, if indents are to be used to separate two individuals in a
quoted text involving both individuals, BOTH people should be named in the
"said" heading; not one. This being done, the indents then serve their
useful purpose as a separator. Naming only one individual, then using a
double indent that can easily be missed is both misleading and
disingenuous.



Hmm.

First things first. S.P.M. posted a lengthy explanation (for him) and you
shot back with a two word answer - that for me was worth a chuckle.

WRT the above passage snip:
I think there is style and then there's general use (SOP). I'm sorry Dudley
ole'buddy, but I think you're not right in this case. I responded to you.
You were responding to someone else.

No need to include all previous information from the thread, just enough to
move it along. S.P.M's name wasn't needed for that end - plain and simple.

....means two posts ago.

......means your post.


I think you're grabbing at being wronged here. You've got the 'No One Treats
DH That Way" machinery in place and by gum you're bound and determined to
pull me into it.

This is how I trim my post. This is how I've been trimming my posts.
However...In the future, I will take special care to attribute other
people's quotes when your name is involved.

Now a postscript, as it were.
At first glance I didn't think you had a horse in this race because you
seldom trim your posts. Then I realized that, in a pedantic technicality
kind of way, your bases are covered. g


Montblack


  #2  
Old March 5th 05, 05:28 PM
Dudley Henriques
external usenet poster
 
Posts: n/a
Default

Right and wrong on Usenet is simply a matter of perspective. The reason you
will never be right with me is because I attack the premise as being
incorrect. You are simply stating and restating that the protocols must be
right because they in fact exist.
Based on your logic, and the protocol itself, someone can write out in
plain English "Dudley Henriques said" followed by a forty page document
written in plain English by someone else showing a ....followed by a one
word reply by Dudley Henriques showing a and everything is just fine.
Sorry, but this protocol doesn't pass my smell test, and I'm in total
disagreement with the premise that allows it.
The and protocols are fine, as long as the poster doesn't lead the
reader into the text by using just a single name of the two people being
quoted. If two quotes are involved, it might be protocol to lead in with a
single name, but it's misleading enough that it's at least unethical.
Mentioning someone by name, followed by a long text that was NOT what the
mentioned party said, and justifying this with the protocol stinks pure
and simple.
You are correct however that this is accepted practice on Usenet. This is
also one of the reasons I have so little respect for Usenet and those who
push this type of unethical nonsense on others.

Common sense dictates that if two quotes are involved, BOTH names should
appear in the heading, not one. Usenet protocol allows otherwise.
I'll go with common sense every time on issues like this.
Usenet isn't my life. Over time it's simply become comic relief :-)
Dudley Henriques
International Fighter Pilots Fellowship
Commercial Pilot; CFI; Retired
dhenriquestrashatearthlinktrashdotnet
(take out the trash :-)



"Montblack" wrote in message
...
("Dudley Henriques" wrote)
snip
Let me put it this way. You can be technically right. Montblank can be
technically right. But I will avoid both of you in any post I make on
Usenet because you are playing games with my name under a pedantic litany
of technicality that involves something I believe the average reader
would miss when reading something attributed to me that I did not say.
It's THAT simple!
In my opinion, if indents are to be used to separate two individuals in a
quoted text involving both individuals, BOTH people should be named in
the "said" heading; not one. This being done, the indents then serve
their useful purpose as a separator. Naming only one individual, then
using a double indent that can easily be missed is both misleading and
disingenuous.



Hmm.

First things first. S.P.M. posted a lengthy explanation (for him) and you
shot back with a two word answer - that for me was worth a chuckle.

WRT the above passage snip:
I think there is style and then there's general use (SOP). I'm sorry
Dudley ole'buddy, but I think you're not right in this case. I responded
to you. You were responding to someone else.

No need to include all previous information from the thread, just enough
to move it along. S.P.M's name wasn't needed for that end - plain and
simple.

....means two posts ago.

......means your post.


I think you're grabbing at being wronged here. You've got the 'No One
Treats DH That Way" machinery in place and by gum you're bound and
determined to pull me into it.

This is how I trim my post. This is how I've been trimming my posts.
However...In the future, I will take special care to attribute other
people's quotes when your name is involved.

Now a postscript, as it were.
At first glance I didn't think you had a horse in this race because you
seldom trim your posts. Then I realized that, in a pedantic technicality
kind of way, your bases are covered. g


Montblack




 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Commercial Pilot FAA Knowledge Exam - Includes Gleim TestPrep & Commercial Pilot FAA Knowledge Exam book Cecil Chapman Products 1 November 15th 04 04:22 PM
NEW & UNOPENED: Gleim Commercial Pilot Knowledge Test (book AND Commercial Pilot Test Software) Cecil Chapman Products 2 November 13th 04 03:56 AM
Do You Want to Become a Commercial Helicopter Pilot? Badwater Bill Rotorcraft 7 August 22nd 04 12:00 AM
What to study for commercial written exam? Dave Piloting 0 August 9th 04 03:56 PM
good and cheap commercial flying school hananc Piloting 1 October 23rd 03 04:13 PM


All times are GMT +1. The time now is 06:41 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.