![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
by RK Henry Nov 8, 2005 at 06:31 PM
On Fri, 04 Nov 2005 15:37:56 -0700, Newps wrote: You're making it a thousand times harder than it needs to be. User fees will not be on a per use basis, you will pay a yearly fee most probably based on the weight of your plane. Canada has user fees. Your typical single engine spamcan pays less than $50 per year for his user fees. That's Canadian money of course. So even if the average US owner got a bill each year for $50 it is trivial to the cost of flying. I used to pay $25/year to the IRS for the aircraft use tax. That tax was dropped in the early 1980s because, as was reported at the time, it cost the IRS more to collect than it brought in. Except for the inconvenience of filling out an IRS form, I wouldn't mind paying $50/year. But that's not the proposal that has had me lying awake at night. I remember reading a proposal from the Reason Foundation, which has been a major advocate for user fees, in the Wall Street Journal. As I recall, that proposal included fees of $50 per touch and go and $100/hour for IFR operations. That's an unbearable expense, making ATC cost more far more than gas, depreciation, or insurance. I think the push for user fees is thinly-veiled attempt at wealth redistribution. They consider private pilots to be idle rich playboys. Certain politicians have referred to them as such. The idea of user fees is to strip them of their ill-gotten riches, acquired only by stealing from the hard-working poor. These proposals are intended serve as an interim measure to deal with idle rich playboy pilots, who do no work and contribute nothing to society, until the worker revolt finally comes and provides a permanent solution to inequality. That's why President Clinton proposed FAA user fees with the money being earmarked for social programs. If the FAA actually needs money to operate, then why did he even mention social programs? This proposal completely exposed the purpose of user fees. It's obvious that the FAA has nothing to do with it. RK Henry" The Reason Foundation is a influential Washington think tank that is dedicated to free markets. It generally opposes pork spending, including bridges to nowhere in alaska, subsidies to mass transit, subsidies to GA, etc. It eschews redistribution of wealth. Politically, it is usually slotted as "conservative." Here is their web site: http://www.reason.org/ |
#2
|
|||
|
|||
![]()
The Reason Foundation is a influential Washington think tank that
is dedicated to free markets...opposes...subsidies to GA, Is there a credible study somewhere as to how much is this subsidy really is? If you start with FAA's waste of billions to get their systems to work (documented by GAO), then you may indeed get IFR flights at a $100 each. But ban GA completely, and how much does ATC staffing go down, if at all? Go to fligthaware.com, pick random airports of all sizes, and see whose doing the GA IFR. It's mostly jets and turboprops, and the hefty fuel taxes they pay are lost, for perhaps a net loss to gov't if ATC costs are reduced only somewhat. The avg recreational flyer does 30+ hours a year, perhaps $50 in fed fuel taxes. Many of these guys avoid ATC and even FSS, by using the Weather Channel on a nice day and a local flight. Ban them, and gov't loses $50 a pop profit per year. So, how much is the subsidy -- on a proper, marginal cost computation? Fred F. |
#3
|
|||
|
|||
![]()
GA's
by "TaxSrv" Nov 8, 2005 at 02:55 PM The Reason Foundation is a influential Washington think tank that is dedicated to free markets...opposes...subsidies to GA, Is there a credible study somewhere as to how much is this subsidy really is? If you start with FAA's waste of billions to get their systems to work (documented by GAO), then you may indeed get IFR flights at a $100 each. But ban GA completely, and how much does ATC staffing go down, if at all? Go to fligthaware.com, pick random airports of all sizes, and see whose doing the GA IFR. It's mostly jets and turboprops, and the hefty fuel taxes they pay are lost, for perhaps a net loss to gov't if ATC costs are reduced only somewhat. The avg recreational flyer does 30+ hours a year, perhaps $50 in fed fuel taxes. Many of these guys avoid ATC and even FSS, by using the Weather Channel on a nice day and a local flight. Ban them, and gov't loses $50 a pop profit per year. So, how much is the subsidy -- on a proper, marginal cost computation? Fred F." The opening post on this thread has the Federal DOT site, which has the data the Reason Foundation uses. They use the operating subsidy per passenger mile statistic, so I think it is somewhat biased in favor of long-range (airplane) transportation. Nonetheless, their data and methodology are transparent, so it can be used for a serious debate. The AOPA stuff is just nonsense on a stick. No data, no statistics, no anything. Just "don't raise our taxes, cut the FAA budget." SOP, a boring, and ultimately losing argument... |
#4
|
|||
|
|||
![]()
Just a request to Skylune - since your quoting doesn't quite work, at
least manually put two arrows before and after what you are quoting. for example, this would be quoted Even if it isn't internet style, it sets a quote apart from the rest, and is fairly easy to do even in plain text. Jose -- He who laughs, lasts. for Email, make the obvious change in the address. |
#5
|
|||
|
|||
![]()
"by Jose Nov 8, 2005 at 08:47 PM
Just a request to Skylune - since your quoting doesn't quite work, at least manually put two arrows before and after what you are quoting. for example, this would be quoted Even if it isn't internet style, it sets a quote apart from the rest, and is fairly easy to do even in plain text. Jose -- He who laughs, lasts. for Email, make the obvious change in the address." Sorry 'bout that, Jose. The "newsreaders" (I think they are called that) seem to do that automatically, whereas my talkaboutaviation.com site doesn't automatically put stuff in context when I hit "Post a Reply." I tried cutting and pasting and putting quotes before the post I'm responding to (like this). I know that's not protocol, but its a real pain to put arrows and double arrows, etc. in manually. |
#6
|
|||
|
|||
![]()
I tried cutting and pasting and
putting quotes before the post I'm responding to (like this). Well, that didn't quite work, and you ran into another internet standard. You did start with "by Jose..., but there wasn't any place where you said "end quote" or something like that. It is this that is the problem reading some of your posts - knowing when the quoted stuff ENDS. That's why I suggested the ending arrows too. Now, there is another internet standard - that is that of a signature line. Any lines which follow a line which consists of just two dashes and a space will be considered a signature, and many newsreaders will format it differently. Some newsreaders can be set to hide signatures. Your post quoted mine in its entirety (including the signature) and your new text followed mine, after my signature line separator, and was thus considered a "signature" by my newsreader (and most other newsreaders I'm sure). You probably want to avoid that. So, be aware (or make your website aware) of signature line separators when you post, and more of your posts will be readable. Yes, manually inserting arrows on each line is a pain, which is why I suggested a simple "quote" and "end quote" method for you. I do it myself when necessary. Jose -- He who laughs, lasts. for Email, make the obvious change in the address. |
#7
|
|||
|
|||
![]() "Jose" wrote Yes, manually inserting arrows on each line is a pain, which is why I suggested a simple "quote" and "end quote" method for you. I do it myself when necessary. It is interesting that Skylooser alone, can't even make posting work quite right. -- Jim in NC |
#8
|
|||
|
|||
![]() "Skylune" wrote in message lkaboutaviation.com... "by Jose Nov 8, 2005 at 08:47 PM Just a request to Skylune - since your quoting doesn't quite work, at least manually put two arrows before and after what you are quoting. for example, this would be quoted Even if it isn't internet style, it sets a quote apart from the rest, and is fairly easy to do even in plain text. Jose -- He who laughs, lasts. for Email, make the obvious change in the address." Sorry 'bout that, Jose. The "newsreaders" (I think they are called that) seem to do that automatically, whereas my talkaboutaviation.com site doesn't automatically put stuff in context when I hit "Post a Reply." I tried cutting and pasting and putting quotes before the post I'm responding to (like this). I know that's not protocol, but its a real pain to put arrows and double arrows, etc. in manually. The solution is to stop using talkaboutaviation.com, and use a news reader against the appropriate USENET news group. You do have home Internet access don't you? If so then your ISP should provide the address for the news server. If you are doing all your posting from work then shame on you for goofing off instead of working. Like it or not, you do have some valid points, but they are getting lost in your out-of-control, unintelligible posts. |
#9
|
|||
|
|||
![]()
The solution is to stop using talkaboutaviation.com, and use a news reader
against the appropriate USENET news group. That is the best solution, but using start arrows and end arrows (each on a separate line for clarity) is sufficient, I believe, for legibility, and requires the least of the poster who for whatever reason chooses to post through an "unapproved source". ![]() Jose -- He who laughs, lasts. for Email, make the obvious change in the address. |
#10
|
|||
|
|||
![]()
("Tom Conner" wrote)
[snip] Like it or not, you do have some valid points, but they are getting lost in your out-of-control, unintelligible posts. S-loon, Like a pilot following your local airport's noise abatement procedures, try [snipping] your post quotes down, too... after you start quoting the previous posts that is. :-) Thanks. Montblack |
|
Thread Tools | |
Display Modes | |
|
|