A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

"scratchy" radio transmission



 
 
Thread Tools Display Modes
  #1  
Old January 1st 06, 09:35 PM posted to rec.aviation.homebuilt
external usenet poster
 
Posts: n/a
Default "scratchy" radio transmission

I didn't notice whether or not the OP said that he borrowed a known good
headset, since that's the one thing that is common to both rigs.

Several headsets were tried with same results. Both these headsets
worked fine in wife's C-172 (ATC reports crystal clear)
One of the radios has a new store bought antenna on the belly with new
BNC connectors that came on a "factory built" length of coax to the
radio which came with an antenna "pigtail" already on the tray. This
complete replacement setup seems to xmit no better than the "cheesey"
antenna and antique radio it replaced and is reportedly no different
than the 2nd radio/antenna setup.

Jim

  #2  
Old January 1st 06, 09:40 PM posted to rec.aviation.homebuilt
external usenet poster
 
Posts: n/a
Default "scratchy" radio transmission

Try this description one more time, please. I"m not understanding why a
factory built length of coax with BNC connectors can have pigtails.

Jim


wrote in message
oups.com...


One of the radios has a new store bought antenna on the belly with new
BNC connectors that came on a "factory built" length of coax to the
radio which came with an antenna "pigtail" already on the tray.



  #3  
Old January 2nd 06, 02:02 AM posted to rec.aviation.homebuilt
external usenet poster
 
Posts: n/a
Default "scratchy" radio transmission

Try this description one more time, please. I"m not understanding why a
factory built length of coax with BNC connectors can have pigtails.


Jim

(...radio which came with an antenna "pigtail" already on the tray)

RADIO which came with an antenna "pigtail" already on the TRAY

Thats "pigtail" on TRAY not on coax from antenna. And before I get
chastised again I realize that the term "pigtail" may not be
technically correct but I think most will get the picture here.

Jim

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MX385 Radio removal Marty from Florida Owning 3 May 24th 13 08:26 AM
terminology questions: turtledeck? cantilever wing? Ric Home Built 2 September 13th 05 09:39 PM
I Hate Radios Ron Wanttaja Home Built 9 June 6th 05 05:39 PM
1944 Aerial War Comes to Life in Radio Play Otis Willie Military Aviation 0 March 25th 04 10:57 PM
Ham Radio In The Airplane Cy Galley Owning 23 July 8th 03 03:30 AM


All times are GMT +1. The time now is 03:42 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.