I took the garbage out tonight

I used to store the waste oil in various containers, including milk
jugs, until the semi-annual city "hazardous waste day".

But as a result of this thread I have learned that ALL the local auto
stores accept the oil. So I have bought a 5 gal gas can which I will
use to store/transport the used oil.

I have quick-drains on all (4) of my vehicles so that is going to
streamline the whole oil change process for me.
--
Thanks!
John Clonts
Temple, Texas

What I did after the leaky milk carton was to buy a 2.5 gallon plastic
gas can and mark it "old Oil". I drain the oil into it and carry it to
the FBO's sump and it is gone.

Montblack wrote:

("Ross Richardson" wrote)

I HAD one milk jug leak oil over my garage floor. The bottom fell out
when I picked it up. It had been in there about a month.



I had my first one leak last summer. They were sitting up off the floor
on a wooden step. One day there was a puddle of oil to clean up. Never
had that happen before. They had been there for many, many months.

For transporting to the oil dump/hazardous waste depot, I use a milk
crate lined with an open leaf bag. The jugs go in the bag.


Montblack

"john smith" wrote in message
...

If those are polypropylene milk jugs, you don't want to leave them
sitting very long. Polypropylene absorbs oil and will disintegrate if
left in contact with each other. Don't leave the jugs on the hangar
floor unless you want to clean a gooey mess. Is your hangar floor
epoxied?

I save the heavier gallon jugs that the auto windshield washer/antifreeze
comes in. The squared jugs are the best I've found, but the round ones work
OK too. Possibly they are made from a slightly different plastic. I've
stored oil for more than a year w/o any leakage.

Gary Kasten