OLC - Action Needed

OLC is working on rescoring all the Cambridge logs to get rid of the
red marks. Temporarily they all have yellow marks while they are
working on the program. Please be patient....

This is a bit of a success story.

After trying no less than six different USB 2.0 to Serial adaptors trying to
download a flight from a Volkslogger with SeeYou, StrePla and DOS, I finally
bought a $75 high-speed serial PCIe card. Using this card, SeeYou
downloaded a secure file from the Volkslogger in about 20 seconds. OLC
accepted the file from SeeYou just as quickly - no red mark.

The USB adaptors seemed to work and would download a non-secure file but the
secure file was always corrupted. USB 2 adaptors may be the source of some
of the problems.

Bill Daniels

I uploaded a file from a fairly new Cambridge 302, using SeeYou (3.4)
as always, and for the first time, it's red marked. Tried removing the
claim and uploading manually, no change. Don't see any with yellow
marks.

Will try the SeeYou patch tonight. Does anyone know of any free 3d
party software that does OLC claims like SeeYou? Naviter has a
ConnectMe program that's free. What they need is a SubmitMe program for
OLC!

Patiently,

~ted/2NO

wrote:
I uploaded a file from a fairly new Cambridge 302, using SeeYou (3.4)
as always, and for the first time, it's red marked. Tried removing the
claim and uploading manually, no change. Don't see any with yellow
marks.

I have always downloaded from my 302 to an Ipaq using the Cambridge
software. At the end of the download, it will tell you whether the file
passes the security test. Does SeeYou do the same? If not, download
the VALI-CAM2 file from http://www.cambridge-aero.com/300series.htm, and
see if the IGC file passes the security test. If not, download the IGC
file again from the 302. If the file still doesn't pass, contact Cambridge.


Will try the SeeYou patch tonight.

I don't think it will work with the 302, as it is designed to solve a
problem that the 302 doesn't have.


Does anyone know of any free 3d
party software that does OLC claims like SeeYou? Naviter has a
ConnectMe program that's free. What they need is a SubmitMe program for
OLC!

Patiently,

~ted/2NO

Thanks Greg. The ValiCam2 program reports:

F:\i:Valicam2.exe 649C40R1.IGC
ValiCam for the 302 Version 1.0.0

Checking File:649C40R1.IGC ...

Log Data Integrity OK
Signature Data Integrity OK
Security Fail

....

I wonder what would cause a 302's log file to fail? Could this have
been different if I'd used Cambridge's utility to download it instead
of ConnectMe?

-ted

wrote:
I wonder what would cause a 302's log file to fail? Could this have
been different if I'd used Cambridge's utility to download it instead
of ConnectMe?

Some versions of SeeYou have known problems with corrupting IGC files
when downloading from secure flight recorders. Make sure you have the
latest version of SeeYou, and if you to be absolutely certain of getting
a valid IGC file, use the short DOS program from the IGC web site...

Marc