![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]() Gary Drescher wrote: wrote in message ... Chris Brooks wrote: I am training in the maryland area. I was cleared for an ILS approach to runway 27 at HGR the other day. Here is a plate: http://204.108.4.16/d-tpp/0406/05114I27.PDF I was about 17 miles out at 5000 feet when I got cleared for the approach. My question is, when can I descend to 4000 feet? Anyone? At 17 miles you were not within a published segment of the approach. If you're vectored onto the approach course and cleared for the approach, how close to the FAF do you have to be to consider yourself on a published part of the course and thus permitted to descend to the charted intercept altitude? --Gary The controller is not suppose to issue an "until established" clearance unless the vector is onto a published segment of the approach. In this case the controller would issue a crossing restriction at HAIGS, which you are free to descend to upon receipt of the clearance. If, however, you feel uncomfortable with that, seek clarification! It is a dual responsibility to stay out of the rocks and weeds. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
A question on Airworthiness Inspection | Dave S | Home Built | 1 | August 10th 04 05:07 AM |
Question: DP altitude vs MCA/MEA | Doug Easton | Instrument Flight Rules | 7 | April 7th 04 03:29 AM |
Question | Charles S | Home Built | 4 | April 5th 04 09:10 PM |
Tecumseh Engine Mounting Question | jlauer | Home Built | 7 | November 16th 03 01:51 AM |
Question about Question 4488 | [email protected] | Instrument Flight Rules | 3 | October 27th 03 01:26 AM |