A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

The Most Expensive Ironing Boards in the World...



 
 
Thread Tools Display Modes
  #1  
Old October 9th 06, 11:20 PM posted to rec.aviation.piloting,rec.aviation.owning
John Galban
external usenet poster
 
Posts: 64
Default The Most Expensive Ironing Boards in the World...


Dylan Smith wrote:

A little oil, when smeared over the side of the aircraft, goes a long
way. I once did a stupid pilot trick (was interrupted during my preflight and
forgot to replace the oil filler cap/dipstick on the C140!) and on
landing a short time later discovered what looked like a gallon of oil
coating the side and belly of the aircraft. However, not much had
actually been blown out the engine. Fortunately, the cap/dipstick was
still where this idiot had left it - on top of the engine!


I did this on a Continetal powered 172. The dipstick was separate
from the oil filler neck (much bigger opening). I lost 2 quarts on a
3 hr. flight and the plane was covered from nose to tail and dripping
all over my tiedown. Like you, I opened the cowl and found the cap
right where I'd left it. Sitting on top of the battery box. It was
pretty embarrasing, as my IA had come out to see what happened after
seeing me taxi past.

A few years later (same plane) I landed in the middle of nowhere in
Nevada and the FBO lady came out and was excitedly pointing at my
plane. When I got out and saw oil all down the side, I couldn't
believe I'd done it again. As it turned out, I didn't. This time, the
entire oil filler neck had departed the engine somewhere over Idaho or
Nevada. It was press-fit into the engine and had come loose over the
decades. This time I lost 2 1/2 quarts and had to wait 3 days for the
part.

John Galban=====N4BQ (PA28-180)

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Film Features Newsmen on World War II Combat Gliders Pete Brown Soaring 0 June 6th 06 03:04 AM
American nazi pond scum, version two bushite kills bushite Naval Aviation 0 December 21st 04 10:46 PM
Hey! What fun!! Let's let them kill ourselves!!! [email protected] Naval Aviation 2 December 17th 04 09:45 PM
PW-5 NewLetter from Francois Pin Soaring 0 December 21st 03 12:03 AM
God Honest Naval Aviation 2 July 24th 03 04:45 AM


All times are GMT +1. The time now is 12:13 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.