A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

$1500 Cash Reward



 
 
Thread Tools Display Modes
  #1  
Old May 27th 07, 01:03 AM posted to rec.aviation.homebuilt
Maxwell
external usenet poster
 
Posts: 1,116
Default $1500 Cash Reward


"Frank Stutzman" wrote in message
...

My current hangar is a steel structure with sheet metal siding. Its
your typical T-hangar set-up, with internal walls (sheet metal again)
separating the individual units.

With a cordless drill and (maybe) some sheet metal snips I'm sure I
could be inside my hangar unit within 15 minutes just by removing
some sheet metal. Once I was inside a unit, I could work my way to
all the other units without anyone noticing. Who would suspect the
whine of a drill or a rattle of sheet metal around a hangar?


Everyone might check their own hangers to be sure, but many are a 2 second
trip through a walk in door, even with a deadbolt.

A lot of the door facings on metal buildings can be sprung far enough with a
tire tool, that you can get in quicker that way than with a key. The facing
will usually even spring back completely, leaving very little evidence that
the building has been entered.






 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
$1500 Cash Reward [email protected] Piloting 327 June 12th 07 07:01 PM
$1500 Cash Reward-- Aircraft and Hangar Burglaries at KFQD [email protected] Owning 2 May 26th 07 01:33 AM
Wanted Cambridge 1500 mount Andy Soaring 1 October 19th 05 12:33 AM
Compaq Aero 1500 Cradle PENN2P Soaring 1 October 18th 04 06:04 PM
1500 K in Sierra Wave?? Gary Kemp Soaring 1 March 31st 04 05:26 AM


All times are GMT +1. The time now is 12:23 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.