KIS TR-1

In article , Evan Carew
writes:


Robert,

Well for starters, where's you web site. As I said, I am working on a
TR-1, and am comming up to the point where I am putting the final
touches on, and I am looking for a community of similar builders who I
can ask questions of.

Evan



UH, well, you are going to kick yourself for not looking but please do so
now...my signature line has my web address clearly identified.

You will find information on joining the KISBUILDERS newsgroup on my web site.


Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)

Robert,

Hmm, seems I have been to this site before. I also remember trying to
send you some email from an address I found on the site, but I got no
reply. Well, its nice to finally get in contact with you.

At the time, I wanted to get some help with tricks on mounting the wing.
A task I am now an expert on. Now I am looking on advice on appropriate
fasteners for use in mounting the cowling & advice in ducting the engine.

I recently saw somebody's pulsar which had a jibaru engine with
fiberglass duct work on the engine. Will this work? I thought that the
temperatures in the engine compartment got too hot for that.

Evan

RobertR237 wrote:
In article , Evan Carew
writes:


Robert,

Well for starters, where's you web site. As I said, I am working on a
TR-1, and am comming up to the point where I am putting the final
touches on, and I am looking for a community of similar builders who I
can ask questions of.

Evan

Robert,

BTW, if I have additions to the TR-1 manual, could I add them to the site?

Evan

In article , Evan Carew
writes:


Robert,

BTW, if I have additions to the TR-1 manual, could I add them to the site?

Evan


I not only welcome but encourage contributions to the site from ALL the
builders. If you have additions to the builders manual, I would be happy to
add them as an addendum. The current manuals on the site are a collection of
updates from several builders and from Vance Vaqua who helped work on the
originals. There are builders manuals and owners operating manuals for both
aircraft.

I would also like to add any photo contributions on your building progress as
well.

Just e-mail anything you would like to add directly to me and I will try to get
them posted as soon as possible. (That is not always right away but it will
get done eventually.) Take everything after the ".com" off of ".composite" to
get my email address. Also, join the builders newsgroup so that you can ask
questions directly of other TR-1 builders.




Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)

Robert,

This is the second posting in which you mentioned the builders news
group (KISBUILDERS?). Where can I find this newsgroup?

Evan
Just e-mail anything you would like to add directly to me and I will try to get
them posted as soon as possible. (That is not always right away but it will
get done eventually.) Take everything after the ".com" off of ".composite" to
get my email address. Also, join the builders newsgroup so that you can ask
questions directly of other TR-1 builders.

Ok, I don't normally respond to my own questions, but I see that there
is a list server on the EAA site called kisbuilders. I just joined.
Thanks for the pointer.

Evan

Evan Carew wrote:
Robert,

This is the second posting in which you mentioned the builders news
group (KISBUILDERS?). Where can I find this newsgroup?

Evan

In article , Evan Carew
writes:


Robert,

This is the second posting in which you mentioned the builders news
group (KISBUILDERS?). Where can I find this newsgroup?

Evan


On the opening page of the web site you will find the instructions in bright
red lettering. See below:

There is a great KIS builders email list that you are encouraged to join if you
are a builder or interested in becoming one. To join, send an email to
with the word "subscribe kisbuilders" in the body
of the email.

We welcome your participation.


Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)

osite (RobertR237) wrote in message ...

KIS Cruiser in progress...Slow but steady progress....

Progress is good.

Robert, I sent you an email 'bout week and a half ago
with some contact info. If you don't need it, congrats
and Nevah Mind. If you didn't get it and would like
it, drop me a line.

hoeltzli at swbell dot net

sydney@followupRus

In article ,
(Snowbird) writes:


Robert, I sent you an email 'bout week and a half ago
with some contact info. If you don't need it, congrats
and Nevah Mind. If you didn't get it and would like
it, drop me a line.

hoeltzli at swbell dot net

sydney@followupRus


Sydney,

I dug back and could not find it in my files. I then went to the deleted files
on AOL and found the email. I didn't recognize the email address and the "long
lost contacts" subject caused me to move it to the trash files. I have pulled
it out and will do a follow-up on it. Yes, I am interested. Things have
improved a little and I have enough to get through the end of the year but
nothing permanent.

Thanks again,

All help is gratefully accepted.

Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)