Air compressor question

Jim,

I can see where that would be good, but it would be a bit hard lugging
around that compressor to the different parts of the house for the remodel.
;-)

I liked the pawn shop idea. I might be able to get something functional and
cheap right now to figure out the features I want for the real one.

It is starting to cool off here in Indiana so, I guess, the new two car
garage/hanger/building shop is out for this year.

Fred Speculating I wonder what the average time difference is between
deciding to build an airplane and actually starting the project.

Thanks for the input,
Fred

"Morgans" wrote in message
...

"Rich S." wrote in message
...
"Frederick Wilson" wrote in message
news:FmC9b.365132$Oz4.142857@rwcrnsc54...
I am still working on home remodel so it will be some time before the
airplane gets started. I am pretty darn convinced that I am going to
do
an
all wood and fabric airplane. More than likely, the Fisher Tiger Moth.

Anyway, I have come to the point in my home remodel that I am going to
need
an air compressor. But instead of just getting one that will do the
job
here, what might I need one for when it is airplane time?

What size and compressor (one or two cylinder) should I look at?

Any name brand preference?

Whichever model you choose, be SURE to listen to it run before you plunk
down your money. Some of the new compressors are loud enough to shred
your
neighbor's panties.

Rich S.

Part of the things to consider is if you will use a lot of air tools, or
go
electric. For a wood airplane, I could see a bit of sanding, and spraying
finish. A small 30 gal 3 HP compressor would not keep up with a air
sander,
or spray gun very well. I like air tools cause they are usually cheaper,
lighter, and don't get hot under heavy usage.

If you can swing it, get a big upright 5 HP , NOT oilless unit, and put it
outside if you can. It saves the ears and the space in the shop. All it
needs is a small lean-to roof.
--
Jim in NC

"Frederick Wilson" wrote in message
news:2uX9b.372665$Oz4.149020@rwcrnsc54...
Jim,

I can see where that would be good, but it would be a bit hard lugging
around that compressor to the different parts of the house for the
remodel.
;-)

I liked the pawn shop idea. I might be able to get something functional
and
cheap right now to figure out the features I want for the real one.

It is starting to cool off here in Indiana so, I guess, the new two car
garage/hanger/building shop is out for this year.

Fred Speculating I wonder what the average time difference is between
deciding to build an airplane and actually starting the project.

Thanks for the input,
Fred

Hose is cheap! ;-)
--
Jim in NC

Check out item 47065-2VGA at http://www.harborfreight.com/.

4-1/2 HP 21 GALLON CAST IRON VERTICAL COMPRESSOR
Two Built-in Universal Quick Connect Couplers for Convenient Air Hose
Connection
Long-life oil lubricated compressor with precision machined cast iron sleeve
Twin capacitor motor with thermal overload protection
Wheel kit with 6'' wheels and ergonomic for smooth portability
Oil level indicator window for easy maintenance
Reduced vibration with rubber foot stabilizers
4-1/2 peak horsepower; 120 volt, 60Hz
125 PSI max; 4.4 CFM @ 90 PSI; 11.1 CFM @ 40 PSI
Shipping weight: 152 lbs.
$169.99

Rich S.

"Rich S." wrote in message
...

4-1/2 HP 21 GALLON CAST IRON VERTICAL COMPRESSOR
4-1/2 peak horsepower; 120 volt, 60Hz

chuckle

Wayne

"wmbjk" wrote in message
...

"Rich S." wrote in message
...

4-1/2 HP 21 GALLON CAST IRON VERTICAL COMPRESSOR
4-1/2 peak horsepower; 120 volt, 60Hz

chuckle

Wayne

Can't be any good, 'cuz it don't cost enough - right?

Rich S.

"Rich S." wrote in message
...
"wmbjk" wrote in message
...

"Rich S." wrote in message
...

4-1/2 HP 21 GALLON CAST IRON VERTICAL COMPRESSOR
4-1/2 peak horsepower; 120 volt, 60Hz

chuckle

Wayne

Can't be any good, 'cuz it don't cost enough - right?

Not at all. I was just chuckling about the 4.5 hp on 120 part. I've got
a shop full of HF stuff, and I resent it when the tool bigots make fun
of that equipment. Making fun of my low budget tools is *my* job. :-)

I checked on the compressor link you posted. Seems like a good deal, and
should be fine for most projects. Output is too small for much painting
though.

Wayne

"wmbjk" wrote in message
...
Not at all. I was just chuckling about the 4.5 hp on 120 part. I've got
a shop full of HF stuff, and I resent it when the tool bigots make fun
of that equipment. Making fun of my low budget tools is *my* job. :-)

I checked on the compressor link you posted. Seems like a good deal, and
should be fine for most projects. Output is too small for much painting
though.


My apologies. I wouldn't buy one of those sight unseen, but the original
poster gave me the impression that he was shopping for the most bang for his
buck. I have a Craftsman 2-cylinder compressor which I got from my dad when
he died in 1978. It's still going strong, but I doubt that I will pass it
along to my son. He's already got a better one.

Up at the hangar, I have one which I assembled fifty years ago. A 2-cylinder
refrigeration compressor, a washing machine motor, and a tank welded up from
10" pipe. In the past I painted my '54 Corvette with it, but had to use
lacquer. You could only paint one fender and then drink beer until the
pressure came back up. Now I use it to blow up tires, a task well-suited to
its capacity.

Rich S.

wmbjk wrote:

I was just chuckling about the 4.5 hp on 120 part.

Must be a Craftsman knockoff ;-)

Dave 'math challenged' Hyde

"Dave Hyde" wrote in message
...
wmbjk wrote:

I was just chuckling about the 4.5 hp on 120 part.

Must be a Craftsman knockoff ;-)

Dave 'math challenged' Hyde


They didn't give the amps. Maybe it is a 25 amp unit!


--
Jim ( when pigs fly) in NC

"Rich S." wrote in message
...
Check out item 47065-2VGA at http://www.harborfreight.com/.

4-1/2 HP 21 GALLON CAST IRON VERTICAL COMPRESSOR
Two Built-in Universal Quick Connect Couplers for Convenient Air Hose
Connection
Long-life oil lubricated compressor with precision machined cast iron
sleeve
Twin capacitor motor with thermal overload protection
Wheel kit with 6'' wheels and ergonomic for smooth portability
Oil level indicator window for easy maintenance
Reduced vibration with rubber foot stabilizers
4-1/2 peak horsepower; 120 volt, 60Hz
125 PSI max; 4.4 CFM @ 90 PSI; 11.1 CFM @ 40 PSI
Shipping weight: 152 lbs.
$169.99

Rich S.

I dunno beans about air compressors, so maybe someone else can explain it to
me:
The usual wall circuit is 15 Amperes, times 120 volts peak is 1800 watts.
746 watts in a horsepower, so how do you get 4.5 HP out of a wall socket?

Tim Ward