Garmin G1000 gets airways

On Fri, 3 Aug 2007 09:14:26 -0500, "Dan Luke"
wrote:


"Dan Luke" wrote:

Mine was installed today; I'll report on how it works this weekend.

OK, I couldn't wait, so on the way to work this morning I went and fired up
the G1000 on the ramp.

The airways flightplan feature worked fine once I figured out that there was
an error in the new Garmin Cockpit Reference Guide. It mentions a "Load
Airways" softkey that never appears, and fails to mention that you have to
press the MENU hardkey at some point to get the "Load Airways" option. Don't
they user-test these manuals?

Short story: you put in the entry fix, airway id and exit point (from a menu)
and you're done. The airway id.exit fix is then in your flight plan. The
airway is in white, with its number, on the course line on the moving map.

When in FPL (on the MFD, this does not work from PFD), if the waypoint
before the one you're about to insert is part of an airway, when you
large knob down to the next blank space, as soon as you turn the small
knob to enter the next waypoint the lower right softkey will turn into
"LD AWY". I've never had to hit menu or anything else when inserting
an airway from the FPL button on the MFD. It's all in where your
cursor is when you turn the small knob.

"Peter Clark" wrote:

When in FPL (on the MFD, this does not work from PFD),

That must be it: I was doing it from the PFD FPL.

Got it to work, though!

Thanks,

--
Dan
T-182T at BFM