![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
On Jan 25, 10:16*pm, cavalamb himself wrote:
wrote: The second question/idea is a bit far out: Are there any "open source" projects? It's obviously extremely difficult to exchange parts of airplanes across the web, but people could develop something together and everyone builds his or her own plane from the plans that come out of this (and even those not building could bring in their expertise). I know this is not computer software (even for a model airplane it could work well), but has something like this been undertaken? Is it feasible? Oliver If open source airplane designs worked like open source software I wouldn't go near the end product -- because my life would depend on it. And if I ever find out open source software is running aircraft systems I won't fly on it. But of course that will never happen. Almost ALL experimental Amateur built airplanes would qualify as open source...- Hide quoted text - - Show quoted text - When you get right down to it....the aviation industry has been open source since it began. All the advancements in aviation design have been largely improvements on prior designs. Hell, even Rutans designs are throwbacks to the Wright Brothers. |
#2
|
|||
|
|||
![]() "BobR" wrote When you get right down to it....the aviation industry has been open source since it began. All the advancements in aviation design have been largely improvements on prior designs. Hell, even Rutans designs are throwbacks to the Wright Brothers. That's putting it a bit too simplistic, don't you think? Wright brothers didn't use a stiff outer skin of cloth and resin to carry the loads, did they? How about a feathering tail on a spaceship? If you want to put it that way, Leonardo Da Vinci was copied by the Wright Brothers. -- Jim in NC |
#3
|
|||
|
|||
![]()
On Jan 26, 11:40*pm, "Morgans" wrote:
"BobR" wrote When you get right down to it....the aviation industry has been open source since it began. *All the advancements in aviation design have been largely improvements on prior designs. *Hell, even Rutans designs are throwbacks to the Wright Brothers. That's putting it a bit too simplistic, don't you think? Wright brothers didn't use a stiff outer skin of cloth and resin to carry the loads, did they? *How about a feathering tail on a spaceship? If you want to put it that way, Leonardo Da Vinci was copied by the Wright Brothers. -- Jim in NC A bit simplistic maybe but not inaccurate. The canard design is not that far removed from the Wright Brothers tail first design. Aviation once proven possible has been largely evolutionary throughout its development with the major breakthroughs being made in the early years. Technology has allowed us to refine the designs but the basics have not changed. The feathering tail on a spaceship is interesting but hardly revolutionary. |
#4
|
|||
|
|||
![]()
When you get right down to it....the aviation industry has been open
source since it began. *All the advancements in aviation design have been largely improvements on prior designs. *Hell, even Rutans designs are throwbacks to the Wright Brothers.- Hide quoted text - - Show quoted text - I don't think you know what open source means. Most aviation advances have been held strictly secret, either by companies or by governments. Nobody advertises their advances to their potential adversaries. Open source DEMANDS that it's a fundamental right to know how something works. Anybody wants to give their ideas away, fine by me. |
#5
|
|||
|
|||
![]() |
#6
|
|||
|
|||
![]()
On Jan 29, 12:02*am, Charles Vincent wrote:
wrote: When you get right down to it....the aviation industry has been open source since it began. *All the advancements in aviation design have been largely improvements on prior designs. *Hell, even Rutans designs are throwbacks to the Wright Brothers.- Hide quoted text - - Show quoted text - I don't think you know what open source means. Most aviation advances have been held strictly secret, either by companies or by governments. Nobody advertises their advances to their potential adversaries. The Wright brothers took to the air on wings that had an airfoil that had evolved from the experiments of Otto Lilienthal, which they read about from Lilienthal's own writings. *Their wire and strut braced wing evolved from early experiments and designs of Octave Chanute, who not only freely shared his discoveries with the Wrights, he visited them at least once. *In fact, Chanute organized an international conference to share information on aeronautics. *The Wright brothers were keen to patent their advancements, not keep them secret. *It is pretty hard to keep something secret when it is in plain sight for all to see, like for example Bleriot's modern tractor design which quickly eclipsed flying bedsteads like the Curtiss and the Wright flyer. *After World War one, when the US realized any lead they had in aviation was not only history but they were now way outclassed, people like Gugenheim and the US government (through NACA), went out of their way to foster open sharing of information. *Guggenheim did it by bringing top flight theorists to the US (students of Rankine, Prandtl and Froude) to teach and NACA did it by systematic experimentation and dissemination of the results. *This pretty much continued up until WWII. * * *In fact, I have papers and books from US efforts during WWII that not only reference the pre war work of Japanese researchers, but laud them. Charles Was NACA and Guggenheim paying these people to collaborate? If so, how is that open source like the open source software movement? No one is getting paid to share their knowledge in open source. You have to share your knowledge without compensation -- that's how it works. You don't sell your hard won knowledge. You give it away so others can benefit from it. What about WWII and after? Sharing open source super sonic secrets? Anyway that's a lot of ******** and besides the point. Open source software projects are often poorly tested pieces of half working junk written ad hoc and often by very immature, inexperience developers. The Linux kernel is an exception. Apache is an exception. For each of these there are 10 thousand pieces of crap. You're free to share and collaborate all you want. Go for it. |
#7
|
|||
|
|||
![]() |
#9
|
|||
|
|||
![]()
That 99% of everything is crap doesn't make the stuff that isn't any less
good. Some of the best software available today is open source. Don't reject any software because it's open source (or not). Pick, or reject, it because of how good it is. I don't. I use some open source products. |
#10
|
|||
|
|||
![]()
Wrong. There are lots of folks getting paid to work on open source software.
I've occasionally even been one of them. I should clarify: most of the bad experience I've had with open source is a result of people NOT being paid to work on it. Therefore there is no motivation to create a really good product, generally. I have objections to copyleft. I have no objections to collaboration. I don't like bad software. I don't like software running aircraft. I'd prefer a live human being to make mistakes than a software program to run an airplane into the ground. Which has happened before and will happen again. |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Long EZ plans, Mini IMP plans, F4U Corsair plans, materials, instruments for sale | reader | Home Built | 1 | January 26th 11 01:40 AM |
Open-source flight/space simuators for Linux | Timothy Stark | Simulators | 0 | July 8th 07 03:37 AM |
Duster Plans For Sale - BJ-1b fullsize sailplane plans | WoodHawk | Soaring | 0 | April 25th 05 04:37 AM |
want to trade 601 plans for 701 plans | [email protected] | Home Built | 0 | January 27th 05 07:50 PM |
Free aircraft plans? | Gil G. | Home Built | 0 | July 23rd 03 04:18 PM |