iPAQ repair

On Mar 24, 11:59*am, wrote:
Considering the obvious first, which you certainly have, but the
battery has to be locked for the HP to boot. Did you check if the lock
switch at the bottom of the unit is moved towards the "locked"
position?
I wish it was only that simple
Cheers
Robert

Thanks, but yup, battery locked. The day it quit, I had been setting
up some tasks in XCSoar. I stopped the program, stopped all running
programs, and turned it off. I put it in my briefcase and went on an
errand. When I got home, I got it out and turned it on. I got a
warning that it was low on memory, and saw that the audio recorder was
'recording'. I couldn't get it to stop, so I did a soft reset. When
it re-booted, it was still showing the recorder on, and memory
critically low. I shut it off, got out the manual, and did a hard
reset procedure. From that point on, it will only get to the very
first "splash" screen, and won't go any further. I talked to a rep.
at PCTech, and he said it needed a re-flash. I'll ask that a new
internal battery be installed while it's there.
The upside is that it got me off my duff to update XCSoar with the
latest version, which has a couple USEFUL features my old version
didn't. The downside being I loaded all the new stuff in my HX2495,
which is great except the display is better on the 4705. No worries
one way or another, I'll have something ready when the soaring gets
good!

Considering the obvious first, which you certainly have, but the
battery has to be locked for the HP to boot. Did you check if the lock
switch at the bottom of the unit is moved towards the "locked"
position?
I wish it was only that simple
Cheers
Robert

Thanks, but yup, battery locked. The day it quit, I had been setting
up some tasks in XCSoar. I stopped the program, stopped all running
programs, and turned it off. I put it in my briefcase and went on an
errand. When I got home, I got it out and turned it on. I got a
warning that it was low on memory, and saw that the audio recorder was
'recording'. I couldn't get it to stop, so I did a soft reset. When
it re-booted, it was still showing the recorder on, and memory
critically low. I shut it off, got out the manual, and did a hard
reset procedure. From that point on, it will only get to the very
first "splash" screen, and won't go any further. I talked to a rep.
at PCTech, and he said it needed a re-flash. I'll ask that a new
internal battery be installed while it's there.
The upside is that it got me off my duff to update XCSoar with the
latest version, which has a couple USEFUL features my old version
didn't. The downside being I loaded all the new stuff in my HX2495,
which is great except the display is better on the 4705. No worries
one way or another, I'll have something ready when the soaring gets
good!



James,

have a look around here and there before paying for a fix....


http://www.mobilitysite.com/boards/i...5-upgrade.html
http://forum.brighthand.com/showthread.php?t=243857


Bagger

On Mar 24, 11:11*pm, bagmaker
wrote:
-
Considering the obvious first, which you certainly have, but the
battery has to be locked for the HP to boot. Did you check if the
lock
switch at the bottom of the unit is moved towards the "locked"
position?
I wish it was only that simple
Cheers
Robert

Thanks, but yup, battery locked. *The day it quit, I had been setting
up some tasks in XCSoar. I stopped the program, stopped all running
programs, and turned it off. *I put it in my briefcase and went on an
errand. *When I got home, I got it out and turned it on. *I got a
warning that it was low on memory, and saw that the audio recorder was
'recording'. *I couldn't get it to stop, so I did a soft reset. *When
it re-booted, it was still showing the recorder on, and memory
critically low. *I shut it off, got out the manual, and did a hard
reset procedure. *From that point on, it will only get to the very
first "splash" screen, and won't go any further. *I talked to a rep.
at PCTech, and he said it needed a re-flash. *I'll ask that a new
internal battery be installed while it's there.
The upside is that it got me off my duff to update XCSoar with the
latest version, which has a couple USEFUL features my old version
didn't. *The downside being I loaded all the new stuff in my HX2495,
which is great except the display is better on the 4705. No worries
one way or another, I'll have something ready when the soaring gets
good!-

James,

have a look around here and there before paying for a fix....

http://tinyurl.com/yqe4mchttp://foru...d.php?t=243857

Bagger

--
bagmaker

Thanks,
I'll try that tonight if I get time. What's really funny is that
I've posted my initial question on 2 different pocket pc forums, and
received NOT ONE reply with any help. Not even one pointing me to a
commercial repair firm. Here on RAS, I get REAL help.
Gotta' love the internet AND our incredibly ecclectic intrepid gliding
community.