![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
On May 18, 9:46 pm, Lou wrote:
Not that I plan to do this but I was wondering, if one was going to plan to install a diesel in a homebuilt, what diesel would one put in? Lou Currently there is the delta-hawk in the USA. There is an english 2- cylinder 2 stroke of ~100hp that is based on the Jumo engines. There are a couple of German companies, one with a couple of certified gear reduced diesels, and there is an experimental diesel based on the Mercedes smart engine. Also there is the new Subaru diesel, and the latest pump-dues engine from VW. Ford also has a tight little european TDI in the 1.5L range, but I don't know what the figures on it are. I believe Lycoming makes a TDI for military applications, (UAV's) )but I've not seen it offered commercially. In a nutshell, if you aren't going delta-hawk, you will be looking overseas since domestic diesel tech is about a decade behind the curve. Of all of them the Jumo style engine in the UK peaks my interest, but it's probably cost prohibitive. It has a lower parts count, and is based on technology that has worked in aviation since the 30's. The flip side is their aren't very many documented installations. The automotive TDI's have direct injection systems that are computer controlled. Essentially they reduce cylinder pressure by injecting several pulses per stroke to simulate a gasoline combustion cycle. This makes for a lighter engine, but you are dependent on common rail injection, computer controls and greater sensitivity to fuel contamination. ( I am speculating on the fuel contamination based on injector design) Switching to mechanical injection on these engines substantially derates them. I am futzing around with a design based loosely on the old Packard diesel with some modern features from other engines. At the moment is is just a few CAD sketches, and I doubt if it will ever become a reality. But I am convinced the Packard design coupled with turbo- normalizing and modern casting/machining technology would provide the lowest parts count, with the highest reliability. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Diesel Jodel information..........and .........diesel plane groups | Roland M | General Aviation | 1 | January 4th 04 04:04 AM |
Diesel Jodel information..........and .........diesel plane groups | Roland M | Owning | 1 | January 4th 04 04:04 AM |
Diesel engines for Planes Yahoo Group Jodel Diesel is Isuzu Citroen Peugeot | Roland M | Home Built | 3 | September 13th 03 12:44 AM |
Diesel engines for Planes Yahoo Group Jodel Diesel is Isuzu Citroen Peugeot | Roland M | General Aviation | 2 | September 13th 03 12:44 AM |
Diesel engines for Planes Yahoo Group Jodel Diesel is Isuzu Citroen Peugeot | Roland M | Rotorcraft | 2 | September 13th 03 12:44 AM |