Way Way Off Topic.... but I am confident the knowledge base in thisgroup can likely help... Computer related

On Jun 19, 3:45*pm, Marc Ramsey wrote:
Gary Emerson wrote:
Ok, when I ordered my dell, I got twin 160 Gigabyte drives. *I've had a
couple of drive failures over the last couple of years and when the
drives failed I found it very inexpensive to buy 300 and 400 Gigabyte
drives. *However, the computer still sees only 160 Gigabytes of usable
space.

RAID 1 always limits your capacity to the smallest drive in the pair.
So, if you want to continue using RAID 1 and increase capacity, you'll
need to replace both drives. *By the way, RAID 1 does a decent job of
protecting against hard drive failures, but it will not protect against
Windows screwups, operator error, etc. *Backups are still a good idea....

Marc

Also, if you simply "clone" the drive or the RAID array with most
software, it will set the size of the new array or drive partition to
the old size.

If you've replaced both drives with a new (larger) set of disks (which
should be identical in a RAID 1 array), then you will probably need to
rebuild the array (or partition) to the larger size. Note that
rebuilding the array can destroy the data on it - this very much
depends on the software and tools you use to reconfigure the array.

Good luck, take care,

--Noel
(who's a RAID 5 kinda guy)