If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Jantar Standard Canopy
Is that possible to buy somewhere only the plastic
part of the Jantar canopy? I should probably take a look at the "ceebaileys" like the previous post said for the Blanik. But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? jmarc... |
#2
|
|||
|
|||
Jantar Standard Canopy
I do not have information, but you may want to specify which Jantar
Std. 3 has different type of canopy than 2 and I am not sure if one from 1 fits 2. Henryk Birecki "jmarc" wrote: Is that possible to buy somewhere only the plastic part of the Jantar canopy? I should probably take a look at the "ceebaileys" like the previous post said for the Blanik. But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? jmarc... |
#3
|
|||
|
|||
Jantar Standard Canopy
Good point! It is a Jantar Std 2 ...
jmarc.. "Henryk Birecki" wrote in message ... I do not have information, but you may want to specify which Jantar Std. 3 has different type of canopy than 2 and I am not sure if one from 1 fits 2. Henryk Birecki "jmarc" wrote: Is that possible to buy somewhere only the plastic part of the Jantar canopy? I should probably take a look at the "ceebaileys" like the previous post said for the Blanik. But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? jmarc... |
#4
|
|||
|
|||
Jantar Standard Canopy
But I think it will not be available that way. *So I post here to
know if anybody have very good condition Jantar canopy used, to sell..? Since it's a Std 2, now you should specify whether you need the front, rear, or both sections since it's a 2 piece'r... There is a canopy part that may be able to be fit for the rear section on wings & wheels if you scroll down the page some... http://www.wingsandwheels.com/Used%20Parts.htm I know where a good canopy mounted to a frame for a Std 3 is should you want to upgrade to a single piece canopy (there's already a few 2's out there with this conversion), although that's a 337 surgery as opposed to mere maintenance... it sure is a nice view though! -Paul |
#5
|
|||
|
|||
Jantar Standard Canopy
You are right again. We need only the rear part.
I took a look at the wings & wheels site. But not sure if I saw the one you talked about! Is seems to be a one piece full canopy without the little door.. So I will get more informations from the dealer.. But the best way is to find out So, lurking on the newgroup, I learn about the MecaPlex company. They seems to be the best place to get a replacement canopy. Maybe they built original parts for glider constructors, too! But it might be a bit pricy. The best might be So if nobody here on the net have good condition used canopy, I probably contact them to know how much it will cost for the plastic part (hoping the door will be "sisu1a" wrote in message ... But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? Since it's a Std 2, now you should specify whether you need the front, rear, or both sections since it's a 2 piece'r... There is a canopy part that may be able to be fit for the rear section on wings & wheels if you scroll down the page some... http://www.wingsandwheels.com/Used%20Parts.htm I know where a good canopy mounted to a frame for a Std 3 is should you want to upgrade to a single piece canopy (there's already a few 2's out there with this conversion), although that's a 337 surgery as opposed to mere maintenance... it sure is a nice view though! -Paul |
#6
|
|||
|
|||
Jantar Standard Canopy
You are right again. We need only the rear part!
I took a look at the wings & wheels site. But not sure if I saw the one you talked about! Is seems to be a one piece full canopy without the little door.. So I will get more informations from the dealer.. Our Jantar is a SZD48-1 Standard 2 Once again, the best way is to find out there a used canopy in pretty good condition.. So, lurking on the newgroup, I learn about the MecaPlex company. They seems to be the best place to get a replacement canopy. Maybe they built original parts for glider constructors, too! But it might be a bit pricy. jmarc.. "sisu1a" wrote in message ... But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? Since it's a Std 2, now you should specify whether you need the front, rear, or both sections since it's a 2 piece'r... There is a canopy part that may be able to be fit for the rear section on wings & wheels if you scroll down the page some... http://www.wingsandwheels.com/Used%20Parts.htm I know where a good canopy mounted to a frame for a Std 3 is should you want to upgrade to a single piece canopy (there's already a few 2's out there with this conversion), although that's a 337 surgery as opposed to mere maintenance... it sure is a nice view though! -Paul |
#7
|
|||
|
|||
Jantar Standard Canopy
On Jun 26, 3:14*pm, "jmarc" wrote:
You are right again. *We need only the rear part! I took a look at the wings & wheels site. *But not sure if I saw the one you talked about! *Is seems to be a one piece full canopy without the little door.. *So I will get more informations from the dealer.. Our Jantar is a SZD48-1 Standard 2 Once again, the best way is to find out there a used canopy in pretty good condition.. So, lurking on the newgroup, I learn about the MecaPlex company. *They seems to be the best place to get a replacement canopy. *Maybe they built original parts for glider constructors, too! *But it might be a bit pricy. jmarc.. "sisu1a" wrote in message ... But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? Since it's a Std 2, now you should specify whether you need the front, rear, or both sections since it's a 2 piece'r... *There is a canopy part that may be able to be fit for the rear section on wings & wheels if you scroll down the page some... http://www.wingsandwheels.com/Used%20Parts.htm I know where a good canopy mounted to a frame for a Std 3 is should you want to upgrade to a single piece canopy (there's already a few 2's out there with this conversion), although that's a 337 surgery as opposed to mere maintenance... *it sure is a nice view though! -Paul Perhaps try joining and posting to the Jantar group on Yahoo. http://groups.yahoo.com/group/jantar-sailplanes/ /Adam |
#8
|
|||
|
|||
Jantar Standard Canopy
On Jun 26, 3:14*pm, "jmarc" wrote:
You are right again. *We need only the rear part! I took a look at the wings & wheels site. *But not sure if I saw the one you talked about! *Is seems to be a one piece full canopy without the little door.. *So I will get more informations from the dealer.. Our Jantar is a SZD48-1 Standard 2 Once again, the best way is to find out there a used canopy in pretty good condition.. So, lurking on the newgroup, I learn about the MecaPlex company. *They seems to be the best place to get a replacement canopy. *Maybe they built original parts for glider constructors, too! *But it might be a bit pricy. jmarc.. "sisu1a" wrote in message ... But I think it will not be available that way. So I post here to know if anybody have very good condition Jantar canopy used, to sell..? Since it's a Std 2, now you should specify whether you need the front, rear, or both sections since it's a 2 piece'r... *There is a canopy part that may be able to be fit for the rear section on wings & wheels if you scroll down the page some... http://www.wingsandwheels.com/Used%20Parts.htm I know where a good canopy mounted to a frame for a Std 3 is should you want to upgrade to a single piece canopy (there's already a few 2's out there with this conversion), although that's a 337 surgery as opposed to mere maintenance... *it sure is a nice view though! -Paul FWIW, the seller of that canopy recently owned a Jantar Std 2. //Adam |
#9
|
|||
|
|||
Jantar Standard Canopy
On Jun 25, 7:11*am, "jmarc" wrote:
Is that possible to buy somewhere only the plastic part of the Jantar canopy? *I should probably take a look at the "ceebaileys" like the previous post said for the Blanik. But I think it will not be available that way. *So I post here to know if anybody have very good condition Jantar canopy used, to sell..? jmarc... if your still looking... http://adverts.gliderpilot.net/?op=s3&id=338 -Paul |
#10
|
|||
|
|||
Jantar Standard Canopy
Are you always looking for a canopy for your jantar ?
I have one for sale for 1000CAD Link of the advice: http://wingsandwheels.com/class/classified.php?id=2398 Pleasure |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LAK-12 or a Jantar, and which model Jantar? | rich | Soaring | 11 | July 18th 05 10:54 PM |
Jantar Std. 3 | [email protected] | Soaring | 2 | March 31st 05 10:50 PM |
Airworthiness Directives for Jantar Standard 3 | Miguel Lavalle | Soaring | 5 | January 24th 04 10:55 AM |
Cockpit sizes of standard Jantar | goneill | Soaring | 2 | December 28th 03 11:29 AM |
Jantar Standard 3 | Miguel Lavalle | Soaring | 9 | November 19th 03 12:01 AM |