![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Monty wrote:
Thanks. I was hoping for the English site, but this will do for starters. Put in the web address www.kronichflug.de into the Google machine and select Translate this page. Links within are also translated. |
#2
|
|||
|
|||
![]()
Did that and sent an e-mail off to them...unfortunately it wasn't in
German and I don't know anyone that speaks it. However, English is fairly common in Europe and hopefully they will be able to translate and respond. Thanks again! |
#3
|
|||
|
|||
![]()
Monty wrote:
Did that and sent an e-mail off to them...unfortunately it wasn't in German and I don't know anyone that speaks it. However, English is fairly common in Europe and hopefully they will be able to translate and respond. Thanks again! Well, since Google is taking over the earth, they also have a page where you can translate text. Appropriately, it's at translate.google.com. Enter your text and select the languages. I don't know how well it works, so I'd include an explanation about the machine-generated translation in the message. When you get a reply, just run it back again. |
#4
|
|||
|
|||
![]()
"Paul Dow (Remove CAPS in address)" wrote in message
... Monty wrote: Did that and sent an e-mail off to them...unfortunately it wasn't in German and I don't know anyone that speaks it. However, English is fairly common in Europe and hopefully they will be able to translate and respond. Thanks again! Well, since Google is taking over the earth, they also have a page where you can translate text. Appropriately, it's at translate.google.com. Enter your text and select the languages. I don't know how well it works, so I'd include an explanation about the machine-generated translation in the message. When you get a reply, just run it back again. I also tried the earlier full page translation that you mentioned and also this cut and paste method, as I had not previoulsy been aware of the google translation features. Both seem to work amazingly well. Not great litterature, nor the salvation of either language from the ravages of careless "street" usage; but certainly fulfilling the objective of the moment--especially if an explanation is included that an automated translation was used. Thanks for adding some very usefull knowledge! Peter |
#5
|
|||
|
|||
![]()
As an update, I've not received any reply regarding plans. I'm
beginning to think the answer to my question is a resounding 'no' to plans, and I'm not in a position to afford the almost 20K euros (plus shipping) for a built one. Besides, where's the fun in that? Back to the web to see if anyone has plans. |
#6
|
|||
|
|||
![]()
On Dec 31, 7:46*am, Monty wrote:
As an update, I've not received any reply regarding plans. *I'm beginning to think the answer to my question is a resounding 'no' to plans, and I'm not in a position to afford the almost 20K euros (plus shipping) for a built one. *Besides, where's the fun in that? Back to the web to see if anyone has plans. There is a project listed on Barnstormers that might be a fair deal. comes with a Rotax 503. I have a set of plans but I'm not willing to part with them. If I ever get them all converted to CAD I'll post the DXF files...................... |
#7
|
|||
|
|||
![]()
I'll take a look, thanks, but I'm really interested in building one
from scratch. I have access to AutoCAD 10 and a large-format plotter...is there anything I can do to help convert those plans? |
#8
|
|||
|
|||
![]()
On Thu, 31 Dec 2009 20:57:13 -0800 (PST), LPM
wrote: On Dec 31, 7:46*am, Monty wrote: As an update, I've not received any reply regarding plans. *I'm beginning to think the answer to my question is a resounding 'no' to plans, and I'm not in a position to afford the almost 20K euros (plus shipping) for a built one. *Besides, where's the fun in that? Back to the web to see if anyone has plans. There is a project listed on Barnstormers that might be a fair deal. comes with a Rotax 503. I have a set of plans but I'm not willing to part with them. If I ever get them all converted to CAD I'll post the DXF files...................... you'll find a digital camera makes quite useful copies of plans. anything upward of 4 megapixels is useful. sometimes the answer is right under your nose.... Stealth Pilot |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Long EZ plans, Mini IMP plans, F4U Corsair plans, materials, instruments for sale | reader | Home Built | 1 | January 26th 11 01:40 AM |
does anyone have a set of Ison Airbike plans? | Stealth Pilot[_2_] | Home Built | 8 | August 16th 09 12:07 PM |
Need Airbike welding plans | Richard John White | Home Built | 3 | December 23rd 04 04:16 AM |
Auction: TEAM Airbike Rotax 277 Fly Now | Bill Berle | Home Built | 1 | December 2nd 04 02:37 AM |
Auction: TEAM Airbike Rotax 277 Fly Now | Bill Berle | Aviation Marketplace | 1 | December 2nd 04 02:37 AM |