![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hi
Thanks for all your replies regarding my questions My opinion is that unless the RS232 Communication and Power supply (and recharging of internal battery) IS PROVEN TO BE WORKING WITH A SINGLE CABLE through the mini USB Port directly from a Vario there is not much advantage of this unit against many other similar PNA Units on the market. I see no transflective in the specification it is just a very good backlight which will be washed out by direct sunlight but which is good if the screen is tilted away from the sunlight.(same as HP314) Still waiting for units with either Pixel Qi or Qualcomms "Mirasol" screensto come on the market. Bruno |
#2
|
|||
|
|||
![]()
Hi Bruno,
I guess time will tell how good it is in sunlight. My guess is that it will be better than any other PDA or PNA (other than perhaps the AV8OR). I think it is a good price/performance compromise. I'm confident that we will have single cable solutions available for connection to any soaring instrument. Best Regards, Paul Remde Cumulus Soaring, Inc. "Mottley" wrote in message ... Hi Thanks for all your replies regarding my questions My opinion is that unless the RS232 Communication and Power supply (and recharging of internal battery) IS PROVEN TO BE WORKING WITH A SINGLE CABLE through the mini USB Port directly from a Vario there is not much advantage of this unit against many other similar PNA Units on the market. I see no transflective in the specification it is just a very good backlight which will be washed out by direct sunlight but which is good if the screen is tilted away from the sunlight.(same as HP314) Still waiting for units with either Pixel Qi or Qualcomms "Mirasol" screensto come on the market. Bruno |
#3
|
|||
|
|||
![]()
Is the mount internally wired with no connector sticking out, and
compatible with a RAM arm or gooseneck from the instrument panel? I have a $70 Navigon PNA for portable use. It's a bit clumsy for a permanent installation. Suction cups and external wires both invite problems. Jim |
#4
|
|||
|
|||
![]()
On Feb 6, 1:48*pm, JS wrote:
* Is the mount internally wired with no connector sticking out, and compatible with a RAM arm or gooseneck from the instrument panel? * I have a $70 Navigon PNA for portable use. It's a bit clumsy for a permanent installation. Suction cups and external wires both invite problems. Jim Jim Nope, it is a PNA with usual external cables etc. Darryl |
#5
|
|||
|
|||
![]()
Hi Jim,
Good questions. The cradle and suction cup mount provided with the Oudie does not have a built-in connector for the Oudie. It is a simple and lightweight cradle designed for use in a car. To be honest, I don't recommend using using the provided suction cup mount on a glider canopy because the suction cup has a lever which can pull more suction than I want on a $5000 glider canopy. I have seen glider canopies "dimple in" to similar suction cups. I fear that it will cause crazing over time. It is designed for use on a glass auto window. I do sell a nice RAM rubber suction cup that I do recommend for glider canopies. I use it often myself and it doesn't deform the canopy. The cradle provided with the Oudie is not designed to mount to a RAM arm, but it is probably possible to file off a few parts, drill and countersink a few holes and use beveled screws to mount it to a RAM arm or the gooseneck arms I sell. It is a nice lightweight cradle. But I'm not sure it is worth the effort. I sell a nice RAM-HOL-PD2 cradle that works great with the Oudie and with all RAM arms and the GNeck2 goosenecks I sell. The good news is that the power/data connector is a miniUSB connector. miniUSB connectors are much more robust than the fragile connectors found on all iPAQs. miniUSB connectors don't have a positive lock (they don't click into place) but I have not heard any complaints of cables falling out of iPAQ 310 units - which also use miniUSB connectors for power and data connections. I like that the Oudie has only one rugged data/power connector. I like that it is located on the bottom of the unit. Best Regards, Paul Remde Cumulus Soaring, Inc. ----- Original Message ----- From: "JS" Newsgroups: rec.aviation.soaring Sent: Saturday, February 06, 2010 3:48 PM Subject: Naviter Oudie Should be Available in April 2010 Is the mount internally wired with no connector sticking out, and compatible with a RAM arm or gooseneck from the instrument panel? I have a $70 Navigon PNA for portable use. It's a bit clumsy for a permanent installation. Suction cups and external wires both invite problems. Jim |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 | Vorsanger1 | Soaring | 8 | January 9th 10 09:46 AM |
US Regionals 2010 | 5E | Soaring | 2 | September 8th 09 05:12 PM |
Well, theres always 2010 | Steve Foley[_4_] | Piloting | 4 | January 3rd 09 11:33 PM |
Naviter site | nimbusgb | Soaring | 5 | June 17th 05 10:04 AM |