![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#13
|
|||
|
|||
![]()
I had a couple of people blast into the middle of my thermal and/or
dive for my thermal and pull up right in front of me at Logan this year, and it was _not_ fun. I subscribe to the method that John describes, and really wish that more people would do it: Aim for a point *outside* the current thermal and you will often find that you come closer in to it than you expect. Stay far enough outside that other gliders are not afraid to continue their circle (turning inside you), then as one comes past you try to duck in and match his/her circle - you'll find yourself often at their 8-10 o'clock. A couple of other thoughts about thermal etiquette: 1) For god's sake, BANK the glider! Haven't guys like Moffatt and Striedeck been preaching this for decades?? Don't the contest results over the last umpteen years show that people who climb the best end up with the highest speeds and the farthest distances? Find the core and get in it. If the thermal is narrow, get that ship up at a 45-50 degree bank. If you sense that the core is to the inside of your current circle, try to get into it and stay in it! If you nurse a shallow bank around the outer fringes, everyone is going to outclimb you and wind up right on your ass. This is not safe for them or for you. 2) Turning inside one glider is NOT the same thing as turning inside several gliders at once. I mentioned this at Logan, but there was a day when at least 4 gliders were stacked up behind a guy doing lazy 20- degree-bank turns and we were all looking for an opening to pass him. I was very cautious, and finally made a strong move to the inside. But the guy behind me had gotten impatient with me and decided to try to cut inside of BOTH of us. I'd already initiated my turn and was watching the glider on the outside, when my peripheral vision caught a wingtip skip coming from behind me and towards my canopy. Suffice it to say, it was not a happy moment! Especially since the guy on the outside was disappearing below my canopy-rail and I didn't have many "outs" with a guy inside of me and a guy outside of me. Luckily the pilot on the inside realized the issue and pulled hard; but it was close for a moment there! Bottom-line: With other gliders in the vicinity, you need to be both considerate and vigilant. --Noel |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Thermal Forcasting -Thermal index | gldrgidr | Soaring | 6 | November 27th 10 10:26 PM |
Dumping ballast in a gaggle, bad etiquette or poor sportsmanship? | chris | Soaring | 4 | May 1st 06 04:56 AM |
Etiquette for posting items For Sale in R.A.S. | TTaylor at cc.usu.edu | Soaring | 0 | February 20th 06 04:10 AM |
Thermal Data Files Thermal Mapping Project Australia | Mal | Soaring | 0 | December 2nd 05 11:14 PM |
Aero Retrieval Etiquette | Ray Lovinggood | Soaring | 0 | September 22nd 03 03:20 AM |