LX NAV offers new V7 Vario

Yes.

Paul Remde
Cumulus Soaring, Inc.

"Eurofighter" wrote in message
...

Can the V7 be combined with a Colibri and an Oudie?
I know that the Colibri and the Oudie communicate well and allow for
task declaration from the Oudie to the Colibri and igc download from
Colibri to the Oudie.
Will this work if I connect a V7 between them?
Thank you!




--
Eurofighter

SeeYou Mobile has a menu just for configuring the LX1600.
Can that menu be used also for the V7 or Naviter will have to release an update?

On Oct 29, 7:25*am, Eurofighter Eurofighter.
wrote:
SeeYou Mobile has a menu just for configuring the LX1600.
Can that menu be used also for the V7 or Naviter will have to release an
update?

--
Eurofighter

EF,

I think it might require some programming. I sent an email to both
LXNAV and Naviter to find out.

Richard
www.craggyaero.com

Hi,

If I remember correctly, the LX1600 did not have any control knobs or other
user-interface - therefore it was necessary to configure it and change the
MacCready on it with a PDA.

Since the LXNAV V7 has a knob / push button user-interface that can do all
setup and in-flight changes, there is no need for SeeYou to have a special
setup menu for it.

Paul Remde
Cumulus Soaring, Inc.

"Eurofighter" wrote in message
...

SeeYou Mobile has a menu just for configuring the LX1600.
Can that menu be used also for the V7 or Naviter will have to release an
update?




--
Eurofighter

On Oct 29, 5:41*pm, "Paul Remde" wrote:
Hi,

If I remember correctly, the LX1600 did not have any control knobs or other
user-interface - therefore it was necessary to configure it and change the
MacCready on it with a PDA.

Since the LXNAV V7 has a knob / push button user-interface that can do all
setup and in-flight changes, there is no need for SeeYou to have a special
setup menu for it.

Paul Remde
Cumulus Soaring, Inc.

"Eurofighter" wrote in message

...





SeeYou Mobile has a menu just for configuring the LX1600.
Can that menu be used also for the V7 or Naviter will have to release an
update?

--
Eurofighter- Hide quoted text -

- Show quoted text -

Paul,

Many things can be change on the Old LX1600 & New LX1606 on two
pages of the SeeYou Mobile software. Pushing buttons and twirling
knobs is very tedious in comparison. The V7 also has two way
communication with the software so it would make sense that pages of
SeeYou may be developed to set up the V7. I beleive the V7 will need
to be defined as an input Device for the SeeYou software, so that will
require some programming. This is the case with other variometers
such as the CAI 302, Tasman, Borgelt, Westerboer, etc.

For those that don't use in flight navigation software it is nice that
the settings can be changed with the knob. But their are many
advantages to setup pages in the software.

Polar. MC +/- & Vol +/- is also much easier to change in the SeeYou
software by Nav Boxes. Especially when you have a large sunlight
readable screen like the Ultimate Le. No need to go two places for
changes.

Lets see what LXNAV & SeeYou say before jumping to conclusions.

Richard
www.craggyaero.com

The LX1600/1606 also has the knob/push button

Originally Posted by Paul Remde

Hi,

If I remember correctly, the LX1600 did not have any control knobs or other
user-interface - therefore it was necessary to configure it and change the
MacCready on it with a PDA.

Since the LXNAV V7 has a knob / push button user-interface that can do all
setup and in-flight changes, there is no need for SeeYou to have a special
setup menu for it.

Paul Remde
Cumulus Soaring, Inc.
[/i][/color]

On Oct 30, 6:00*am, Eurofighter Eurofighter.
wrote:
The LX1600/1606 also has the knob/push button

Paul Remde;788324 Wrote:





Hi,

If I remember correctly, the LX1600 did not have any control knobs or
other
user-interface - therefore it was necessary to configure it and change
the
MacCready on it with a PDA.

Since the LXNAV V7 has a knob / push button user-interface that can do
all
setup and in-flight changes, there is no need for SeeYou to have a
special
setup menu for it.

Paul Remde
Cumulus Soaring, Inc.


--
Eurofighter- Hide quoted text -

- Show quoted text -[/i][/color]

EF

I recieved a response from LXNAV about the SeeYou Mobile Pages.

It will be same pages as for 1600.
However all settings can also be done on V7 itself.

Richard
www.craggyaero.com

EF,

Just received the answer about the V7 & SeeYou Mobile.

You have to select LX 1600 as your device in Menu Settings Hardware Device until we fix this in the new version so that this becomes automatic.

Richard
www.craggyaero.com

Thank you!

Does the same apply to the new little Colibri 11?

If so that would make it a much better match that the Nano as it would
be a nuisance to have to remove the Nano and hand it over to control
for scoring or to have to transfer the flight log to a card via a
PC. Much more desirable to download the log through the V7 to a card
in a PDA. It would be ironic if the LX Navigation company data
recorder were to be a better match for an LX NAV company variometer
than their own data recorder!

John Galloway


On Oct 27, 8:55*pm, "Paul Remde" wrote:
Yes.

Paul Remde
Cumulus Soaring, Inc.

"Eurofighter" wrote in message

...









Can the V7 be combined with a Colibri and an Oudie?
I know that the Colibri and the Oudie communicate well and allow for
task declaration from the Oudie to the Colibri and igc download from
Colibri to the Oudie.
Will this work if I connect a V7 between them?
Thank you!

--
Eurofighter