Nano logging issues

On Saturday, June 30, 2012 8:49:01 PM UTC-5, Glen Kelley wrote:
What yellow box are you referring to?

according to the SYM manual there is supposed to be a yellow box shown on your task line at the point where you can make a Mc0 glide to the finish. I get a green box for the final glide at the current Mc setting but no Yellow box.

Is there a possibility that;

1) GPS was out of service during this time period? Depending on where
you are flying, there may have been some military exercise going on.
Anyone else report something similar on the same day? But this would
only explain one but not several outages.

2) That something in your ship is causing the problem? Did you add
any electronic device lately? New cell phone? Suggest that you turn
off everything you don't need and see if the problem recurs.

Good luck.

- John

On Saturday, June 30, 2012 10:11:57 PM UTC-5, JohnDeRosa wrote:
Is there a possibility that;

1) GPS was out of service during this time period? Depending on where
you are flying, there may have been some military exercise going on.
Anyone else report something similar on the same day? But this would
only explain one but not several outages.

2) That something in your ship is causing the problem? Did you add
any electronic device lately? New cell phone? Suggest that you turn
off everything you don't need and see if the problem recurs.

Good luck.

- John

John,

after the software update on the Nano and Oudie and setting baud rate to 19,200 on both the Nano actually started logging once per second and sending data to the Oudie once per second. I could tell while circling that the heading and information was updating much more rapidly than before.