Source for oxygen fill valve

On Jul 2, 11:02*pm, aerodyne wrote:
On Jul 2, 8:32*pm, wrote:

Okay, I'm just being my normal cheap-ass self here. *Wings and Wheels has the fill valve I want on page 36 (Aerox PB (Schreder) In-line Fill Valve - for 34 bucks. That seems... um, a bit high. Is it that special?
Thanks

Nothing wrong with shopping around. *Suggest try Aerox direct, as they
have great customer service, or perhaps Spruce, Skygeek, Chief,
Wickes, etc.

http://www.aerox.com/parts.html

Aerodyne

Hello, if it makes the cost from Tim easier to accept, M&H wants
$50.00, also as trivia, while the fill valve would see 2200psi on a
full fill, the typical "jumbo D" 5.25X19 inch bottle at that pressure
is containing 640,000 lbs of force, not subtracting the ambient 1
atmosphere. WOW,


Good Lift,

Scott

Think psi, not total. What's the pressure on that ~1/4 inch diameter valve
at 2,200 psi? About 107 lb.


"shkdriver" wrote in message
...
On Jul 2, 11:02 pm, aerodyne wrote:
On Jul 2, 8:32 pm, wrote:

Okay, I'm just being my normal cheap-ass self here. Wings and Wheels has
the fill valve I want on page 36 (Aerox PB (Schreder) In-line Fill
Valve - for 34 bucks. That seems... um, a bit high. Is it that special?
Thanks

Nothing wrong with shopping around. Suggest try Aerox direct, as they
have great customer service, or perhaps Spruce, Skygeek, Chief,
Wickes, etc.

http://www.aerox.com/parts.html

Aerodyne

Hello, if it makes the cost from Tim easier to accept, M&H wants
$50.00, also as trivia, while the fill valve would see 2200psi on a
full fill, the typical "jumbo D" 5.25X19 inch bottle at that pressure
is containing 640,000 lbs of force, not subtracting the ambient 1
atmosphere. WOW,


Good Lift,

Scott

On Jul 5, 6:46*am, "Dan Marotta" wrote:
Think psi, not total. *What's the pressure on that ~1/4 inch diameter valve
at 2,200 psi? *About 107 lb.

"shkdriver" wrote in message

...
On Jul 2, 11:02 pm, aerodyne wrote:

On Jul 2, 8:32 pm, wrote:

Okay, I'm just being my normal cheap-ass self here. Wings and Wheels has
the fill valve I want on page 36 (Aerox PB (Schreder) In-line Fill
Valve - for 34 bucks. That seems... um, a bit high. Is it that special?
Thanks

Nothing wrong with shopping around. Suggest try Aerox direct, as they
have great customer service, or perhaps Spruce, Skygeek, Chief,
Wickes, etc.

http://www.aerox.com/parts.html

Aerodyne

Hello, if it makes the cost from Tim easier to accept, M&H wants
$50.00, also as trivia, while the fill valve would see 2200psi on a
full fill, the typical "jumbo D" 5.25X19 inch bottle at that pressure
is containing 640,000 lbs of force, not subtracting the ambient 1
atmosphere. WOW,

Good Lift,

Scott

I checked that out early on. I was really looking for a source of an
'industrial' nature. Often we pay a premium for identical parts/
assemblies that are commonly used in industry, just because we're
buying them from 'aviation' retail sources. This may or not be the
case with the 'MS' fill valve, but I certainly wasn't able to find
one. I just ordered the filling block from Aerox. No, it wasn't
cheap.