LXNav V7 vs Butterfly vario?

Love my V7!

Richard

The V7 is on my spring wish list. Do you have cables appropriate for connections to Mio 400 running LK8000 and EW Micro Recorder flight logger?

Lane
XF

On Friday, January 4, 2013 5:02:54 PM UTC-8, wrote:
Richard The V7 is on my spring wish list. Do you have cables appropriate for connections to Mio 400 running LK8000 and EW Micro Recorder flight logger? Lane XF

Lane,

I think the Mio is more trouble that it is worth as far a GPS connection.

I would recommend the Oudie Lite that will run the LK8000 Software.

I have direct cables from the V7 to the Oudie, this cable may work or let the smoke out of the Mio.

No problem with the EW Micro the V7 will provide 12V, RX, TX, GND and I can make a cable.

Richard
www.craggyaero.com

Thanks

I love my mio and have my students using it. $50 setup that seems to work fine. I'll try to download the diagrams and see if pinout is same as oudie.

Lane

On Friday, January 4, 2013 7:59:52 PM UTC-6, wrote:
Thanks I love my mio and have my students using it. $50 setup that seems to work fine. I'll try to download the diagrams and see if pinout is same as oudie. Lane

Lane,

I have a V7 and I am extremely happy with it. I ran it connected to a MIO400 this summer and it worked flawlessly. I can't remember exactly what was my cable configuration but it was pretty easy with the pin out provided in the V7 Manual. I switched to a V2 PNA this fall and the cable that was provided with the V7 (normally designed to work with the Oudie) worked like a charm, plug and play.