![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
I replaced the electric retrieve motor with a 6hp Honda. The electric just didn't have enough poop to pull the chute back well. We've been using this payout winch for years now, and it works very well. It is simple and safe.. We are continuing to improve our technique tho. We used to start with the brake set, and accelerate the truck and glider together. But we changed that to accelerating the truck with the brake off, and the line paying out, and after the truck is up to speed, we then set the brake to the proper tension. This worked much better. The glider gets up to flying speed, and off the ground, much quicker, and therefor has control sooner, and gets higher.
The payout winch has several advantages over a conventional winch or auto tow in that when the glider hits lift, the line simply pays out faster. We almost never have any rope breaks because the tension on the brake is never supposed to be set above the breaking strength of the weak link. It's too bad that some people, that have no idea what we are doing, immediately label it as bad and dangerous. It must be nice to be such a know it all, eh? I figured that it would bring out some of the idiots here when I posted the video. It's just so easy to be a dick online these days, isn't it? Boggs |
#2
|
|||
|
|||
![]()
On Wednesday, May 8, 2013 8:53:23 AM UTC-6, Waveguru wrote:
I replaced the electric retrieve motor with a 6hp Honda. The electric just didn't have enough poop to pull the chute back well. We've been using this payout winch for years now, and it works very well. It is simple and safe. We are continuing to improve our technique tho. We used to start with the brake set, and accelerate the truck and glider together. But we changed that to accelerating the truck with the brake off, and the line paying out, and after the truck is up to speed, we then set the brake to the proper tension. This worked much better. The glider gets up to flying speed, and off the ground, much quicker, and therefor has control sooner, and gets higher. The payout winch has several advantages over a conventional winch or auto tow in that when the glider hits lift, the line simply pays out faster. We almost never have any rope breaks because the tension on the brake is never supposed to be set above the breaking strength of the weak link. It's too bad that some people, that have no idea what we are doing, immediately label it as bad and dangerous. It must be nice to be such a know it all, eh? I figured that it would bring out some of the idiots here when I posted the video. It's just so easy to be a dick online these days, isn't it? Boggs Gary, How are you measuring rope tension? |
#3
|
|||
|
|||
![]()
How are you measuring rope tension?
All we have is a pressure gauge on the hydraulics of the disc brake. A tentiometer would be better, but we are trying to KISS. Boggs |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ground launch payout winch systems...Are they suitable for gliders? | [email protected] | Soaring | 13 | August 13th 14 04:30 PM |
Winch Launch Fatality | Ed Gaddy[_2_] | Soaring | 3 | June 23rd 09 11:15 PM |
Pay out winch launch to 2500ft agl.. | WAVEGURU | Soaring | 8 | June 5th 07 07:06 AM |
LIppmann reports a 950 meter winch launch with their Dynatec winch line - anything higher? | Bill Daniels | Soaring | 20 | December 27th 04 12:33 AM |
Winch launch | M B | Soaring | 0 | October 30th 03 07:33 PM |