New Butterfly Display Software 3.2

It is my wish that on the radar screen, the symbol used for ADS-B targets and Flarm targets be distinguishable. I realize that you don't have many pixels to work with but you could consider something like making the glider arrowhead distinctive by making the two sides of the arrowhead concave while leaving the ADS-B target arrowheads with straight sides.

Steve Koerner wrote, On 5/27/2013 7:39 AM:
It is my wish that on the radar screen, the symbol used for ADS-B
targets and Flarm targets be distinguishable. I realize that you
don't have many pixels to work with but you could consider something
like making the glider arrowhead distinctive by making the two sides
of the arrowhead concave while leaving the ADS-B target arrowheads
with straight sides.

I agree - make it easy to distinguish ADS-B and Flarm targets.

Have the "beep" when the butterfly is replaced by a target.

I'd like the "beep!" to be louder.

The menu (long push on the button) only shows Volume in flight. Make it
show the full menu in flight. I'd especially like to change between
select and nearest modes, and the way is now, I can not change between
Stealth and No Stealth.

I'm using the Core with the rectangular display that comes with it.

--
Eric Greenwell - Washington State, USA (change ".netto" to ".us" to
email me)
- "Transponders in Sailplanes - Feb/2010" also ADS-B, PCAS, Flarm
http://tinyurl.com/yb3xywl

What beep? I suspect it is at a frequency above my audible range!

Mike