Flarmview and Powerflarm Core Config File?

Hi,

I don't recommend using the default settings. They are not ideal. I have
some tips for how to set the parameters in my PowerFLARM Tips document he
http://www.cumulus-soaring.com/flarm...FLARM-Tips.pdf

Best Regards,

Paul Remde
Cumulus Soaring, Inc.
___________________________________

"Papa3" wrote in message
...

I'm helping KS update his Powerflarm - firmware update to core and updated
config files using the Config Tool from the Flarm Website. The update to
the Powerflarm worked (solid green color), but the communication to the
Flarmview stopped working.

I poked around and found the baudrate setting on the Flarmview is 38400
while the default setting on the config tool is 19400. Just for gits and
shiggles I went into the manual settings using the config tool, updated the
RJ connection to 38400, and it works.

So, before I claim victory, is there anything else that needs to be done to
the "default" Flarm Config to make it work with a Flarmview. I did RTFM on
the Flarmview, and it is pretty vague on what the communications protocol
settings need to be...

P3