Aerotow towrope instructions

I think the FAA regs state the tow plane weak link must greater but no stronger than 25% more than the glider-side weak link. It is sounding like most people who even try to put in weak links are using the same weak link rope on both ends. How are you ensuring the tow plane weak link is stronger but not by 25% more than the glider side weak link?

Is this a case of it being difficult to live to the letter of the law but we can at least get closer to the spirit of the regs than not trying at all?

BTW, thanks for this thread, I will be building all the ropes for 3 nationals in the upcoming weeks and it is always great to hear what others are doing...

Bruno - B4

FAR 91.309 addresses towing gliders and requires the tow rope to have a strength "not less than 80% of the maximum certificated operating weight of the glider and not more than 200%.

It also provides for special safety links with the same requirements.

The same regulation states the towing aircraft must have a safety link with a breaking strength greater, but not more than 25% greater than that on the glider end, and not more than twice the maximum certificated operating weight of the glider.

Bruno, our plane side weak link never touches the ground. After a couple of tows dragging the glider side weak link on the ground, the tow side is now stronger. I can see the difference in the glider side weak link.

Yes we use a clear vinyl tube over the weak link rope to keep the ring from chafing the rope.
The Janus C specifies a stronger link, 16xx # I think, the 5/16" rope made into a weak link covers that.
Sometimes we run. 5/16" link on the tow end and for all the other gliders a 1/4" link on the glider end.
From a weak memory I think the 1/4" weak link rope is 1200# strength.

We tired the braided poly, but it did not stand up to our rough conditions. So we stay with 3 ply rope.
We are very good at eye splices. Any solo student can make a respectable weak link.

We also use whiffle balls to keep the whip and sag of the rope at a lower rate.

BillT