Single Ground Buss?? Question clarified I hope

Kevin, I have a DG-400, too, and contemplate adding separate battery(s) for intstruments, as you are doing. Where are you locating the new batteries, in the baggage area in front of the spar? Good luck with the project.

On Sunday, February 5, 2017 at 8:00:40 PM UTC-5, Paul Villinski wrote:
Kevin, I have a DG-400, too, and contemplate adding separate battery(s) for intstruments, as you are doing. Where are you locating the new batteries, in the baggage area in front of the spar? Good luck with the project.

Yes, made a tray from 2 inch angle and placed it just against the wall just behind your head. Tray is long enough that the two screws on each side that hold the trays in place in the spar box. This also makes it long enough that it cannot move forward as well as having it anchored with the two screws.

Make sure you use the wiring diagram. I will email it to you privately. It is a fairly complex system. The only small wires I left on the main switch, (which serves as a positive buss is 51, and one other. 51 supplies all the motor related electronics.

Lots of time and tylenol.

Send my your email and I email you the wiring diagram tonight.

Kevin soar AT gmail dot com

Kevin
92

Ahem. Pet peeve on It is "bus", not "buss" /pet peeve off ;-)

The confusion comes via a company that makes "Buss" brand fuses. http://www.bussfuses.net/. But that Buss comes from the Bussmann brothers that started the company.

Oh, kiss it better ...�