|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
|
Thread Tools | Display Modes |
|
|
|
#1
April 11th 04, 03:53 AM
|
|||
|
|||
HI Dave- This is a quarter wave whip- must be mounted on metal- shield
to ground and center conductor to whip- the whip is not at ground potential- Good luck, KJ dave wrote in message news:n1%dc.5551$_K3.46068@attbi_s53... I have a bent whip antenna that I'm about to mount in a friends Lancair and I'm wondering if I should see any connectivity between the center conductor of the BNC connector to the stainless steel element? The ohmmeter shows nothing. Is this thing have capacitance coupling? Thanks Dave 
|
|
#2
April 11th 04, 04:00 AM
|
|||
|
|||
|
dave wrote in message news:n1%dc.5551$_K3.46068@attbi_s53...
I have a bent whip antenna that I'm about to mount in a friends Lancair and I'm wondering if I should see any connectivity between the center conductor of the BNC connector to the stainless steel element? The ohmmeter shows nothing. Is this thing have capacitance coupling? Thanks Dave HI Dave- This is a quarter wave whip- Must be mounted on metal- shield to ground next to whip- center conducter to whip- The whip is not at ground potential- Good luck- KJ
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| comm's RX antenna | acepilot | Home Built | 5 | March 3rd 04 05:34 PM |
| Wanted: Transponder antenna | Grandpa B. | Home Built | 22 | November 28th 03 08:03 AM |
| Marker Beacon Antenna - Paging Jim Weir. | Bart D. Hull | Home Built | 1 | November 27th 03 10:31 PM |
| Nav antenna diplexers | Paul Lee | Home Built | 6 | October 30th 03 05:52 AM |
| Foil antenna and carbon fiber | BD5ER | Home Built | 11 | August 6th 03 04:44 AM |
Hybrid Mode
