![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Hi All,
Many modern aerobatic aircraft have blunt trailing edges on the wing and ailerons. Can someone tell me: 1. Why it this done - what are the benefits and side effects. There is a lot of contradictory information on the web and I simply cannot get to the bottom of it. 2. What is theory behind it (a technical explanation please - I am an aero engineer and understand aerodynamics and stability and control etc). 3. Who was the first to do it. I have looked in all kinds of text books on stability and control and none of them address the issue. This type of trailing edge appears to be unique to aerobatic aircraft. Thanks, Steve |
#2
|
|||
|
|||
![]()
Go to the NACA report server and search for airfoil trailing edge.
http://naca.larc.nasa.gov/ Different airfoil sections but you should see the origins of claims for improved lift curve slope, control effectiveness and changes to hinge moments. |
#3
|
|||
|
|||
![]()
here is what I have read somewhere.
Blunted trailing edges on the wings such as are found on the Extra series of aircraft where I believe this practice was first undertaken cause a delay in the stall. Something to do with the turblence and the associated vacuum causing a delay in separation. To the best of my knowledge the idea was explored in Germany during the 40's(?). Having looked at these aircraft up close these blunted trailing edges are 1/4 thick at most and I gather their effect is significant or I suspect Mr. Extra would have done something else. Cheers .......... :-)) wrote: Hi All, Many modern aerobatic aircraft have blunt trailing edges on the wing and ailerons. Can someone tell me: 1. Why it this done - what are the benefits and side effects. There is a lot of contradictory information on the web and I simply cannot get to the bottom of it. 2. What is theory behind it (a technical explanation please - I am an aero engineer and understand aerodynamics and stability and control etc). 3. Who was the first to do it. I have looked in all kinds of text books on stability and control and none of them address the issue. This type of trailing edge appears to be unique to aerobatic aircraft. Thanks, Steve |
#4
|
|||
|
|||
![]()
Thanks for the update!
Last summer I had the chance to have a look at the SP-55 up close and the trailing edges of all flying surfaces where extremely thick. From 1/4 inch on the wingtip (or elevator/rudder) to more than 1 inch on the wing root. I was wondering what this is for and the russian engieneer I asked couldn´t answer... Cheers schrieb im Newsbeitrag .. . here is what I have read somewhere. Blunted trailing edges on the wings such as are found on the Extra series of aircraft where I believe this practice was first undertaken cause a delay in the stall. Something to do with the turblence and the associated vacuum causing a delay in separation. To the best of my knowledge the idea was explored in Germany during the 40's(?). Having looked at these aircraft up close these blunted trailing edges are 1/4 thick at most and I gather their effect is significant or I suspect Mr. Extra would have done something else. Cheers |
#5
|
|||
|
|||
![]()
I believe this helps with rapid centering of the control, minimizes control
surface overshoot, and allows the pilot to "feel" the center better. wrote in message .. . here is what I have read somewhere. Blunted trailing edges on the wings such as are found on the Extra series of aircraft where I believe this practice was first undertaken cause a delay in the stall. Something to do with the turblence and the associated vacuum causing a delay in separation. To the best of my knowledge the idea was explored in Germany during the 40's(?). Having looked at these aircraft up close these blunted trailing edges are 1/4 thick at most and I gather their effect is significant or I suspect Mr. Extra would have done something else. Cheers ......... :-)) wrote: Hi All, Many modern aerobatic aircraft have blunt trailing edges on the wing and ailerons. Can someone tell me: 1. Why it this done - what are the benefits and side effects. There is a lot of contradictory information on the web and I simply cannot get to the bottom of it. 2. What is theory behind it (a technical explanation please - I am an aero engineer and understand aerodynamics and stability and control etc). 3. Who was the first to do it. I have looked in all kinds of text books on stability and control and none of them address the issue. This type of trailing edge appears to be unique to aerobatic aircraft. Thanks, Steve |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Squared trailing edge of control sufraces | Bruce A. Frank | Home Built | 7 | August 10th 05 09:16 PM |
Consistant trailing edges on rotor blades | 3D-Don | Rotorcraft | 1 | October 24th 03 06:07 AM |
Crooked or Wavy Trailing Edges of Wings and Control Surfaces | Larry Smith | Home Built | 3 | October 24th 03 02:31 AM |
Old Cessna 172 --- Cracks in Flap Trailing Edges | Larry Smith | Owning | 2 | September 19th 03 01:17 PM |
FS: Aviation History Books | Neil Cournoyer | Military Aviation | 0 | August 26th 03 08:32 PM |