A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Lithium-Sulfur For Electric Aircraft Power



 
 
Thread Tools Display Modes
  #1  
Old August 9th 19, 03:01 PM posted to rec.aviation.piloting
Larry Dighera
external usenet poster
 
Posts: 3,880
Default Lithium-Sulfur For Electric Aircraft Power

https://www.avweb.com/recent-updates...ircraft-power/

Bye Looks To Lithium-Sulfur For Electric Aircraft Power
Kate O'Connor August 8, 20191

Image: Bye Aerospace
Bye Aerospace and OXIS Energy have announced a collaboration to
develop and produce a Lithium-Sulfur (Li-S) “advanced battery cell for
the high-voltage battery pack system to be considered for Bye’s future
electric aircraft.” According to OXIS Energy CEO Huw Hampson-Jones,
OXIS’ Li-S cells and battery systems are “over 50 percent lighter than
the current Li-ion cell and battery systems” and are capable of
achieving the energy density needed for Bye’s aircraft.

“A key measure of OXIS’ suitability is to be able to consistently
produce cells in excess of 400 Wh/kg [watt-hours per kilogram], which
are already undergoing evaluation,” said Huw Hampson-Jones. “OXIS
expects to achieve 500 Wh/kg by early 2020.”

Bye Aerospace CEO George Bye says that the Li-S project is separate
from current “agreements and intentions” related to the company’s
eFlyer 2 electric trainer. Instead, it is aimed at the four-place
eFlyer 4 and unnamed “future air taxi aircraft designs.” Work on the
project is scheduled to begin this September with the goal of moving
toward production of commercial cells and battery systems over the
following 18 months.
--------------------------------------------------------------

https://oxisenergy.com/https-oxisene...l-004-1-pdf-2/

OXIS ENERGY GOES INTO MASS PRODUCTION OF LITHIUM SULFUR CELLS
By Oxis EnergyJune 6, 2019Press Releases

OXIS Energy is to establish the first ever manufacturing plant for the
production of electrolyte and cathode active material specifically for
the mass production of lithium sulfur cells. The plant will be built
at the Kenfig Industrial Estate Port Talbot in Wales. OXIS has signed
a 15 year lease with United UK Real Estate Investment Industrial
Holdings Limited to develop the plant and it’s expected that several
hundred jobs will be created within the next ten years. The
electrolyte and cathode active material, which is currently at
Manufacturing Readiness Level (MRL) 8 will be produced for worldwide
export.

The plant will supply the OXIS Energy Brazil Holding’s manufacturing
plant, which has been jointly set up between the State Government of
Minas Gerais and OXIS Energy UK. OXIS will retain its Research and
Development activity in the UK. However, it will collaborate with
Codemig, a wholly owned company controlled by the State of Minas
Gerais to jointly exploit lithium rock deposit for the production of
world class lithium metal, which is used by OXIS for its Li-S cells.
OXIS is currently working on the design of the Brazilian Plant with
NORDIKA Pharmaceutical of Brazil. It is also collaborating with other
European companies, such as Siemens AG who have expertise in digital
manufacturing and cyber security.

The objective is to produce the active material in Port Talbot in
order to supply the cell capacity production in millions of units from
2020 until 2030.

Huw Hampson-Jones, CEO OXIS Energy said, “With support from both the
State Government of Minas Gerais and the Welsh Government, including
the investment made by the Development Bank of Wales, OXIS is working
towards the commercialization of mass production of lithium sulfur
cells for electric batteries in order to address our target markets -
aviation, marine and buses and trucks (Heavy Electric Vehicles).”
The Western seaboard of the ports in Wales, Cardiff, Newport, Port
Talbot and Swansea are ideally placed and accessible for exports to
Brazil. OXIS will decide on the port of embarkation of the goods in
the next 18-24-months.

Huw Hampson-Jones added, "We believe this will create even more jobs
in Wales. In many cases we shall be creating a highly skilled
workforce, and indeed, Wales is the only region in the UK, where it is
seeking to promote bilingualism, which is the basis for multilingual
skills, an essential requirement for OXIS in its expansion plans for
its long-term growth in the export of goods.”

Editor's notes
OXIS Energy Ltd is involved in the design, development and now the
move towards commercial production of lithium sufur cells for battery
systems. With over 40 patent families, OXIS has been granted 182
patents with 99 pending. OXIS has demonstrable empirical data
justifying its claim on the inherent safety of its battery technology.
Contact: Gaenor Howells.
www.oxisenergy.com
------

https://oxisenergy.com/products/

Standard Pouch Cell
OXIS has developed a game changing Ultra Light Lithium Sulfur pouch
cells. Large quantity manufacture will be handled by our manufacturing
plants in Brazil in the the UK.

Nominal voltage: 2.1 V
Typical capacity: 10 – 35 Ah
Specific Energy: Up to 400 Wh/kg
OXIS will develop two types of Ultra Light cells (20 Ah, 2.1V) in
order to address the specific requirements of aerospace and
automotive:
– High energy density cell (500 Wh/kg) for small electric aircrafts
(2 seater), UAV and High Altitude Pseudo Satellite (HAPS).
– High power cell (400 Wh/kg) for automotive applications and
electric Vertical Take Off and Landing (eVTOL) aircraft.

Ultralight Cell – high gravimetric energy density, low temperature
tolerance, lightest of OXIS cell technologies
--------------

https://45uevg34gwlltnbsf2plyua1-wpe...sheet-v4.2.pdf

Ultra Light Lithium Sulfur Pouch Cell Ultra Light
High gravimetric energy density, Rechargeable Li-S Pouch Cell
Key Features
? Extremely lightweight: 400 Wh/kg already proven
? Safe
? Full 100% Discharge Capability
? High Power type for Aviation and Electric Vehicle
? High Energy type for Aeronautical, Defence and Maritime
? Bespoke cell sizes available
Ultra Light Cell Technology Specifications
Type High Power High Energy
Part Number POA000343 POA000412
Availability Evaluation Sample
Operating Voltage (V) 1.9-2.6
Nominal Voltage (V) 2.1
Typical Capacity (Ah)
0.2C discharge at 20°C to 1.9V
19±0.5 14.7±0.5
Gravimetric Energy (Wh/kg) 300±5* 400±10**
Max. Peak Discharge (C)
30s, 50% SoC, 20°C
6 2
Max. Continuous Discharge (C)*** 3 1
Max. Charge Rate (Hours) 4
Cycle Life (Cycles)
100% DoD****, 80% BoL
60-100 60-100
Operating Temperature (°C)***** 0 to 30
Storage Temperature (°C) -30 to 20
Pouch Format (mm)
Length x width x thickness
151±1 x 116±1 x 10.7±0.2 145±2 x 78±2 x 10±1
Tab Dimensions (mm)
Length x width x height
27±1 x 20 x 0.2
Cell Weight (g) 141±2 85±2
Abuse Safety Testing In-House to IEC62133 standard
Notice to Readers:
OXIS Energy Ltd reserves the right to make changes to this document
and without prior notice.
We do not support orders from consumers, please see our website for
details about our cell production and battery design partners
V4.2 (Apr-19)
------------------------------------------------------------------

https://byeaerospace.com/3620-2/

OXIS Energy to Develop Proof-of-Concept Advanced, Lightweight Lithium
Sulfur Cells for BYE AEROSPACE
by Alexis Lincoln | Jul 31, 2019 | Latest News | 0 comments

OXIS Energy to Develop Proof-of-Concept Advanced, Lightweight Lithium
Sulfur Cells for BYE AEROSPACE

OXIS Energy to Develop Proof-of-Concept Advanced, Lightweight Lithium
Sulfur Cells for BYE AEROSPACE

Companies Launch Phase 1 of Collaboration Program

The OXIS Energy Lithium-Sulfur battery cell technology offers
significant benefits to aviation and as a result, it is collaborating
with Bye Aerospace of Denver, Colorado to produce a common Li-S
advanced battery cell for the high voltage battery pack system to be
considered for Bye’s future electric aircraft. These cells will
achieve the higher energy density required for such aircraft. The
project will commence in September 2019.

Huw Hampson-Jones, CEO OXIS Energy, said, “Aviation is one of OXIS’
target markets, and in the first instance, Regional Rapid Air Taxi
Transportation. A key measure of OXIS’ suitability is to be able to
consistently produce cells in excess of 400 Wh/kg, which are already
undergoing evaluation. OXIS expects to achieve 500 Wh/kg by early
2020. Our Li-S cells and battery systems are ideally suited for
aviation. They are over 50% lighter than the current Li-ion cell and
battery systems, with the winning formula of a high energy cell at the
power required. The use of the same cell format across batteries will
also help our customers to minimise cost and improve serviceability.”

George Bye, CEO of Bye Aerospace, said “New Li-S battery cells from
Oxis have the potential to greatly enhance the quality, cost and
performance of eFlyer 4 and our other future aircraft projects. Our
collaboration with OXIS is separate from the current eFlyer 2
agreements and intentions we have with confirmed and our future supply
chain partners. Bye Aerospace is working with Oxis on the Li-S battery
cell characteristics to significantly improve our eFlyer 4 and future
air taxi aircraft designs’ performance. The average age of the global
market for Turboprop fleet is 28 years. OXIS has the potential to
provide a Li-S battery cell that is truly a game-changer.”

In ground tests in Europe, OXIS has already shown that Li-S has
demonstrated a significant improvement in simulated flight duration
compared with Lithium NMC; it will now undertake a further series of
tests which will provide a robust indication of the OXIS Li-S
performance.

Over the next 18 months, the aim is to move towards the production of
commercial cells and battery systems in order to meet the volume
roll-out criteria set by Bye Aerospace.

Editor’s Notes
OXIS Energy Ltd is involved in the design, development and now the
move towards commercial production of lithium sulfur cells for battery
systems. OXIS manufactures and produces all aspects and components in
the making of the Li-S cell. With over 44 patent families, OXIS has
been granted 183 patents with 101 pending.
Contact: Gaenor Howells.
www.oxisenergy.com

Bye Aerospace is developing FAR 23-certified general aviation
aircraft, starting with the eFlyer 2, for the flight training role.
The eFlyer family of aircraft, featuring exemplary engineering,
research, and electric aircraft solutions producing no CO2, are
designed to answer compelling market needs. The company, a finalist in
the manufacturing category for ColoradoBiz magazine’s Top Company of
the Year 2019, was founded by George E. Bye, who is also Chairman and
CEO.

###


Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
VTOL Electric Aircraft 2G Soaring 5 February 10th 18 07:47 PM
SunAero Electric Aircraft Larry Dighera Piloting 0 September 27th 14 04:52 PM
Pilotless Electric Motor Glider Generates Clean Power Mike Mike Ground Soaring 0 November 27th 11 06:27 PM
There is no spin in electric power meters Mark.[_2_] Piloting 7 December 12th 10 10:00 PM
"Resulting replacement power... requirements for electric... is obtained" Mark Piloting 3 September 21st 10 03:23 AM


All times are GMT +1. The time now is 09:01 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright ©2004-2019 AviationBanter.
The comments are property of their posters.