Kyler Laird wrote in news:kgoo41-gc5.ln1
@jowls.lairds.org:

On our way home not long ago we landed in Denver with our oxygen
getting low. I asked for a fill and they gave it their best shot
but our configuration didn't leave them sufficient space for all
of the adapters they needed to use.
Any ideas on installing something like this in an Aztec?

Maybe a simpler option, given that the FAA will get involved in any
permanent installation. As I understand it, the real problem is not with
the fill port, but rather with the adapters some FBO's need not fitting
into the space.

Go to your local welding gas supply company and have them order or make a
short (12" to 18") extension hose. One end fits your fill port. The other
end can be the same as your fill port *or* it can be some other connector
if you are finding them more common at FBO's. Either way, no adapters near
the aircraft fill port are needed.

-----------------------------------------------
James M. Knox
TriSoft ph 512-385-0316
1109-A Shady Lane fax 512-366-4331
Austin, Tx 78721
-----------------------------------------------