"Chris" wrote in message
...
[...]
With the 182, it is 80 knots turning from the 45 to downwind, 75 on base,
and 70
on final. I don't understand why pushing the prop to full flat has any
noise
effect whatsoever.

Exactly

Exactly, except for those airplanes that cannot maintain level flight at
pattern speed with gear and flaps out at final descent power settings.

Which is, by the way, all airplanes with a constant speed prop. The power
setting for final descent is necessarily lower than that required for level
flight within the pattern, even if you slowed ALL the way to your final
approach speed. RPM will thus be higher, assuming the pitch is set to full
fine pitch (high RPM). Higher RPM means more noise.

If Jim's 182 flies along level in the pattern at the same airspeed and prop
RPM that he uses for final descent, I have no idea how he accomplishes a
final descent at all. A plane like that would be stuck up in the pattern
indefinitely.

Pete