Any plans-built "RV equivalents" out there?

Never mind I found the 601 stall speeds and as I figured the RV-9/9A is
still equivalent or slower, even with a 160hp Lyc (44 solo and 50 gross)
Jerry

Gordon Arnaut wrote:

Hey Guys,

I'm not trying to promote Jime Bede. I've never even owned a Yankee or any
of Jim's other designs -- alhtough I know several Grumanns owners and they
are excellent flying airplanes.

The BD-18 does seem like "vaporware" right now, but the smaller single-seat
BD-17 has flown and I don't see why the BD-18 shouldn't fly just fine.

Another possibility for building an aluminum two-seater from plans is Chris
Heintz's Zenith 601 series. With a Lyc 235 max cruise is "only" 138mph, but
stall would be lower than on an RV-9. The Zenith actually has a little more
wing area than the RV with a max weight that is conisederably lower.

You can use a Rotax 912, Jabiru, Continental O-200, or Lycoming on this
plane, or even a Corvair. Lots of people build these from scratch and they
use pulled "Avex" rivets, so no bucking -- which means they go together a
lot quicker.

Personally, I understand Netgeek's point about wanting to build from
scratch. While Van's prices are very attractive compared to what's out
there, I think the actual material costs are probably only a fraction of
that. There are lots of people who build metal planes from scratch. I know a
couple of guys who are building all-metal Polliwagons.

Regards,

Gordon.

PS: I would still rather build a wood plane.


"C.D.Damron" wrote in message
news:Ibu5e.2589$8Z6.1278@attbi_s21...

"Morgans" wrote in message
...

Has it flown yet? How many are flying, and how many hours?


How dare you ask the obvious.