Finally got to fly my new bird

Check your master switch from the back. Pipers have two poles on one actuator,
one is used to control the master relay, the other connects the alternator field
circuit to the buss. The side that handles the field circuit handles several
amperes, so the switches tend to get a bit cranky with age. It should show it
in the electrical schematic in your POH.

Wayne wrote:

The master switch only closes the master solenoid though right? This plane
doesn't have a separate switch for alternator. It's a 61 and had a generator
originally I believe. The fact that is goes out at high RPM makes me think
it is either over voltage, or a loose connection moving from the engine
vibration. Don't know though.
Wayne

"Ray Andraka" wrote in message
...
Check the integrity of the alternator side of the master switch, the field
breaker and the field wiring. If anything has a high resistance, it can
cause
this type of behavior. The master switch is a prime suspect.

--
--Ray Andraka, P.E.
President, the Andraka Consulting Group, Inc.
401/884-7930 Fax 401/884-7950
email
http://www.andraka.com

"They that give up essential liberty to obtain a little
temporary safety deserve neither liberty nor safety."
-Benjamin Franklin, 1759