Question on Owner Produced Interior parts

Having said that, the FAR police are not about to come out and see that you've
fabricated a bracket or panel out of aluminum to replace a cracked plastic
panel. Me? I'd stay away from titanium and make it all out of aluminum just to
keep the odd inspector out of the picture. They understand aluminum. They
don't have a freakin' CLUE about titanium.

Do NOT, under ANY circumstances allow yourself to be drawn into the
337-FSDO-Engineering paperwork nightmare. Do it, be safe, and be happy.

Jim




Bill Zaleski
shared these priceless pearls of wisdom:

-The FAR's do NOT specify "equivelant or better". Owner produced parts
-must conform to the original specifications and production processes.
-You are not allowed to make an aircraft part "better" unless you
-obtain an STC or field approval. Owner produced parts do not require
-a 337, as they are not major repairs or alterations.



Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com