Your fancy schmancy dream machine

----clip----


4) And regarding Sport classification, remove top speed limitation,
the stall speed requirement is sufficient; if someone can build a wing
with low speed stall characteristic and high top speed, then we'd all
like to have it.


A wing with those characteristics needs moving parts such as Fowler
flaps and slats. Think 727. That's likely to either be so heavy as
to outweigh the category, or require such exotic materials as to be
unaffordable.

The 727 is the dirtiest bird I ever saw when configured for landing on
final approach. I thing they hang everything out except the kitchen
sink. G

Some 727 history.

When the 727 first came out, the final approach speed had been
established by test pilots. They were able to transition from the high
drag landing configuration and flare properly to make a safe landing
without stalling. This (while by the book) approach speed was as low
as possible to qualify the bird for landing on some of the short
commercial runways.

When bird became operational with the Airlines there were a couple of
hard landings (crashes) where the bird (and some passengers) received
serious damage because the pilots flared and stalled due to high drag
from landing configuration.

Airlines were about ready to stop flying the bird when someone
suggested that the approach speed be increased 3-5 MPH to allow time
line pilots to flare and make normal landing. From then on every one
knows the success of the 727 for years and years.


And another round of hanger flying G


Big John


One of the landing accidents was at Salt Lake City. High density
altitude, etc. Bird fell out of the sky on flare and hit in the over
run short of R/W.