![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
"Marc Ramsey" wrote in message m... "Duane Eisenbeiss" wrote... Here's an example from some Operating Limitations circa 1998: 7. This aircraft shall not be flown unless it is inspected, maintained and operated in accordance with appropriate technical publications as follows: Flight Manual for the ELAN/GLASER-DIRKS, DG-300 ELAN ACRO, dated 5/92, as revised and the Maintenance Manual for the ELAN/GLASER-DIRKS, DG-300 ELAN ACRO, dated 5/92, as revised. I've owned four experimental gliders over the past 10 years, and they all had this same basic wording. It is apparently part of the boiler plate Ops Lims in whatever Advisory Circular the FSDO uses to put these things together... Marc My older sailplanes Operation Limitations were sort of "hand written" (ie: much simpler). The Limitations for my current ship was directly out of a "boiler plate" on the FAA inspector's desktop computer. I watched as he composed it. I guess that different offices use different criteria. Thanks for filling me in on what is happening out West. Duane |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| USFJ commander defends US response to, probe of helo crash | Otis Willie | Military Aviation | 0 | August 28th 04 01:29 AM |
| US military rejects Japan police request for chopper probe | Otis Willie | Military Aviation | 0 | August 19th 04 03:58 AM |
| landing gear cleaning | Bob Miller | Owning | 4 | July 5th 04 10:24 PM |
| Follow-up probe ordered into June 'friendly-fire' hit | Otis Willie | Military Aviation | 0 | March 3rd 04 04:46 AM |
| Broken line to Oil Temperature Probe, Repairable? | rkane33 | Owning | 2 | July 25th 03 04:19 AM |