![]() |
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#2
|
|||
|
|||
|
In most cases if you have a David Clark style headset all you have to do is change the mic to a civilian type. The electro fet M-7A is the desired mic but the old M1 which is bigger will also work. It will just plug right in to the same plug at the mic. You just have to loosen two set screws at the mic to remove the plug.. I have some friends that used to fly ex-military OH-58's and Bell 206 helicopters also and they tywraped a second mic to the back of the military mic and would rotate the mic around 180 degrees on the ball and socket mic mount on their flight helmets and swap the mic plug to the other mic to change between military and civilian aircraft. For fixed wing aircraft you also need a single plug U-174/U to two plug adapter Y cable. Several places sell these DC PN 18253G-05 including Sporties for about $40. David Clark sells a dual impedance headset H10-66 that has a switch to change between the mil and civilian types. The addition is an internal mic amplifier PN 18911G-01 and a switch. The mil mic is a 4 ohm impedance dynamic (no built in amp]. The civilian mic is a dynamic mic with an internal amplifier so that it looks like an old style carbon mic, the amp is powered by the radio. The earphones are about 150 to 300 ohms in either case. John F On 26 Feb 2006 16:16:13 -0800, wrote: Hello I've not posted on rah before, but have lurked long enough to realize that you guys have a few electronics experts among you. What I have is a Gentex sph-4 military flyers helmet. This is a single plug helicopter helmet. I've been told that the microphone impedence for military helmets is different (sorry guys I don't have the actual values) from civilian helmets, and I have tested this helmet in a helicopter. The earphone portion works fine. My question is what must be done to this helmet to make use of it in a civilian helicopter? Is it as simple as replacing the existing mic with a proper resistance civilian mic? Or is it something more tricky and electronically sinister? Any thoughts would be appreciated, thanks in advance! Get yourself in the air, no matter how you get up there! Wayne |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 30 Jan 2006 - Today’s Military, Veteran, War and National Security News | Otis Willie | Naval Aviation | 0 | January 31st 06 04:21 AM |
| Updated List of Military Information-Exchange Forums | Otis Willie | Naval Aviation | 0 | November 20th 05 05:13 AM |
| Military Funeral Honors "Honoring Those Who Served" | Otis Willie | Naval Aviation | 0 | February 13th 05 10:41 PM |
| 24 Sep 2004 - Today’s Military, Veteran, War and National Security News | Otis Willie | Military Aviation | 0 | September 25th 04 12:08 AM |
| Max Cleland is CBS source for memogate | Bob Coe | Military Aviation | 21 | September 22nd 04 02:59 AM |