More dumb CNX-80 questions -- unloading an approach?

"Roy Smith" wrote in message =
...
This seems to be my week for stupid CNX-80 ****.
=20
Returning to HPN today, I asked for the ILS-34. I punched up PROC, =
then=20
selected ILS-34/Vectors and executed it. A little while later, I=20
decided I wanted to fly the ILS on the #2 NAV, and just monitor my=20
progress on the CNX-80 by having it navigate direct to the airport.
=20
So, I hit -D-, expecting to scroll down to the bottom of the flight=20
plan until the destination was highlighted, then hit "Direct". To my=20
surprise, the last line in the flight plan was no longer my =
destination,=20
but instead "hold Manual". Of course, that makes sense (it's the=20
missed approach hold).
=20
But, the question then becomes, once I've loaded an approach, how do I =

get rid of it? It's easy to overlay it with a different approach, but =

is there a way to get back to no approach procedure being loaded, so =
the=20
destination is the last waypoint in the flight plan?
=20
I guess I could have gone into the database and spelled KHPN out, but=20
being able to highlight it from the flight plan is so much easier.

In your flight plan, scroll down to "ILS 34:", Press "EDIT", then "CLR".
You will be asked to confirm "Delete all legs of ILS 34".
Accepting that leaves you with a discontinuity before KHPN.
"CLR" that discontinuity, then press "EXEC".
HTH
---JRC---

In article ,
"John R. Copeland" wrote:

In your flight plan, scroll down to "ILS 34:", Press "EDIT", then "CLR".
You will be asked to confirm "Delete all legs of ILS 34".
Accepting that leaves you with a discontinuity before KHPN.
"CLR" that discontinuity, then press "EXEC".

Ah, that makes sense. Thanks!