A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Bend over, folks...



 
 
Thread Tools Display Modes
  #1  
Old June 20th 07, 04:31 PM posted to rec.aviation.homebuilt
[email protected]
external usenet poster
 
Posts: 217
Default Bend over, folks...

On Jun 20, 4:16 am, Alan Baker wrote:
In article ,

"Maxwell" wrote:
"Alan Baker" wrote in message
...


Sorry, but no.


I have the right to go about my business without being "shaken down" by
anyone.


Sure, and as soon as you identify yourself and your authority to be there,
you have no problem. But if you were able to tie the hands of law
enforcement, anyone could be there, for any reason.


I don't need authority to be there, and as far as identifying myself
goes, that means giving my name and address -- verbally.


And for good measure immediately afterwards smile, extend your
hand and add, pleased to meet you.

--

FF




  #2  
Old June 21st 07, 05:25 PM posted to rec.aviation.homebuilt
Maxwell
external usenet poster
 
Posts: 1,116
Default Bend over, folks...


wrote in message
ups.com...
On Jun 20, 4:16 am, Alan Baker wrote:
In article ,

"Maxwell" wrote:
"Alan Baker" wrote in message
...


Sorry, but no.


I have the right to go about my business without being "shaken down"
by
anyone.


Sure, and as soon as you identify yourself and your authority to be
there,
you have no problem. But if you were able to tie the hands of law
enforcement, anyone could be there, for any reason.


I don't need authority to be there, and as far as identifying myself
goes, that means giving my name and address -- verbally.


And for good measure immediately afterwards smile, extend your
hand and add, pleased to meet you.


Be cordial of coarse and keep your hands in sight, but be careful of hand
shakes, especially on initial contact.

Cops are taught that there is at least one gun at EVERY scene, their OWN.
Never do anything to approach their firearm side, it's the first thing an
unarmed bad guy is going to consider, and an attempted hand shake is a know
set-up. If you notice, a good cop will always stand at and angle to you,
never facing you directly. They are taught from birth to keep their gun on
the far side of you. This makes hand shaking a good bit of a red flag.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lexan Bend Radius J.Kahn Home Built 10 December 7th 06 04:09 PM
Cessna 303 Down in South Bend Jay Honeck Piloting 16 November 17th 06 11:12 PM
Big Bend, Texas airport? Rachel Piloting 1 January 23rd 06 03:18 AM
Bend, OR (S07) to OSH route suggestions Jack Allison Piloting 4 April 12th 04 09:19 PM
birch ply- Bend oregon? patrick mitchel Home Built 0 January 16th 04 12:40 AM


All times are GMT +1. The time now is 02:45 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.