A while back, someone sent me the repair procedure for Terra radio switches (the digital ones). My radio is the other type, so I did not keep those instructions. Now a good friend needs those repair instructions, so if you have them, please send me another copy. Thank you, George Graham

I have a 1959 36HP VW engine and would like information and opinions on converting this for use in a small single place homebuilt. Also can anyone tell me or point me to a source of this engines HP and, more importantly, torque vs RPM curve. Thanks Claton

23 October 2003 I recently told a fellow he should be using a different cam in his engine. Later messages made it clear I had been talking to the wrong guy. (I get lots of mail.) Trouble is, now I can't remember WHO I was talking to. So here's a general retraction, cross-posted. If you're...

A few weeks ago I sighted down the trailing edges of a newly-built aluminum experimental aircraft with a respected following. The wing's trailing edges would make you dizzy they were so uneven. It was a little shocking. The phenomenon reminded me of a novice builder's wooden horizontal...

A White Lightning is receiving a new engine in South Carolina. It is a 6-cylinder Subaru with gear reduction drive from the engineers at Crossflow Aero Corporation, www.crossflow.com I just got pictures today. The Lightning is being prepared for Reno 2004. The engine will be turbocharged.

Irregardless whether I agree or disagree but aren't there political news groups you could post this on? Let's have some order in news groups and stick to the topic. "Ö§âmâ ßíñ Këñoßí ®" wrote in message ... The Bu$h...

Now, git, troll. Here's the thread that got the lying inbred cracker dripping: 1 Splat! Sep 24, 2003 \-2 Ken Sandyeggo Sep 24, 2003 \-3 Larry Smith Sep 29, 2003 \-4 Ken Sandyeggo Sep 30, 2003 |-5 Barnyard BOb -- Oct 1, 2003

Hi all, I am looking for a place in dallas to get the following parts AN667-2 or MS20667-2 and AN666-2 or MS21259-2 I figured some of you home builders have some good contacts! Any Ideas?

Good morning all, We have just returned from the "Flight for Sight" Adventure around region Queensland (Australia) raising around $50,000 for charity in a Sinus and Virus motorglider. To enjoy our adventure please click the following...

I'm about ready for the panel work in my Zenith Zodizc 601XL. Are the Falcon non-TSO'ed gyros (directional and attitude) any good? Anyone have problems with them? Also, if they are non-TSO'ed, if I ever wanted to IFR certify plane in future, do I need to replace these? Thanks in advance Louis G.

Do you have any experience with the Italian firm http://www.gt-propellers.com/ ? We are investigating the purchase of a new prop for our plane Cherry BX-2. The swiss homebuilt plane Cherry BX2. http://community.webshots.com/album/95279152pEyLod At present we have an Arplast ECOprop 4TD propellor...

A few month ago a link was posted to a site where you can design a panel online by draging the instument to a panel. I searched Google but could not find it. Anybody knows the URL? Thanks Yoram (panelless) Leshinski

http://monolithicdome.com/gallery/commercial/hangars03/index.html Monolithic Dome Airplane Hangars

Question Guys. In the Hatz wings the internal brace wire is specified as 3/16" AN703. Does anybody know a source for this? Spruce and Wicks do not specify. Thanks, Tom Mathes

A liberal response to what I've read... There's no denying what you experienced. If you were thrilled by something, then that's what happened - whether it was planned or came from a surprise. Whether it was appropriate OR how you handled it is a question for debate. I've really learned something...

Yipyip, and we talked back and forth just like old buddies. And you know what? I used Rosalind's bank card. I am utterly shameless. I called all over today at the salvage yards looking for a window latch for a 170, fearing that Rosalind would get her pretty nose out of joint if we ordered a...

Can someone give a brief description of the differences of the two? When one would be used instead of the other?

http://groups.yahoo.com/groups/roadable_aircraft

Roadable aircraft group guys with pics.....gotta chack this out! http://groups.yahoo.com/group/roadable_aircraft/

In Perth, Western Australia, a project started in March 1997 officially concluded today (Sunday 19 October) with the Kent Street Senior High School's Vans RV-6A getting the CASA greenlight to carry pax at a function this afternoon at the Royal Aero Club of Western Australia. 8,500 student hours...