A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Altimeter 3066



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #20  
Old December 2nd 06, 09:18 PM posted to rec.aviation.piloting,rec.aviation.student
Jim Macklin
external usenet poster
 
Posts: 2,070
Default Altimeter 3066

At the coldest place in the carb. It depends where the
probe is installed. If in the throat, then you might want
to see 100° F, if at the throttle plate /venturi, then just
solidly above freezing.


"Newps" wrote in message
. ..
|
|
| Jim Macklin wrote:
|
| Using carh heat on the ground,
|
| In cruise flight carb heat should be set to give a carb
temp of approx
| 45-50F.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATC Altimeter Settings O. Sami Saydjari Instrument Flight Rules 81 April 11th 05 08:07 PM
Pressure Altitude and Terminology Icebound Piloting 0 November 27th 04 09:14 PM
Local altimeter at BFM Dan Luke Instrument Flight Rules 3 June 15th 04 02:01 PM
Why not use the F-22 to replace the F/A-18 and F-14? Tony Naval Aviation 290 March 7th 04 07:58 PM
Why not use the F-22 to replace the F/A-18 and F-14? Guy Alcala Military Aviation 265 March 7th 04 09:28 AM


All times are GMT +1. The time now is 04:36 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.