A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Bad timing...



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old March 12th 07, 05:36 PM posted to rec.aviation.piloting,rec.aviation.owning
Peter Dohm
external usenet poster
 
Posts: 1,754
Default Bad timing...

This makes me just a little curious.

Is the handbrake on a Piper (without toe brakes) mechanical or

hydraulic?

I presume you're meaning on aircraft like the TriPacer which has the
hand brake, but no toe brakes.

In the TriPacer, a cable goes from the hand brake, around a few pulleys,
and ultimately it ends up under the pilot's seat. Under the pilot's seat
(and I'm not joking) you will find a Piper Cub heel brake, with a hole
in the back of the heel brake, where the cable connects.

The heel brake is hydraulic and applies both wheel brakes
simultaneously. The diaphragm has a habit of splitting just when you
really need the brakes, leaving you with nothing!

--
Yes, the Reply-To email address is valid.
Oolite-Linux: an Elite tribute: http://oolite-linux.berlios.de


Yes, that was the question.

BTW, your description of the TriPacer hand brake is a great example of the
way existing inventory happens to find an additional use. It reminds me of
a conversation I witnessed a few years ago at a combination picnic and
hangar-invasion. One of the members was in the process of building a Pitts
Special from plans--and lamented the difficulty of fabricating the elevator
linkage adaptor (for want of better nomenclature) which attached to the
control stick. Another member took one glance and said "that ol' son of a
gun just cut the top off [of] a cow bell".

Peter


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
timing holds [email protected] Instrument Flight Rules 16 February 17th 05 12:18 AM
Approach Timing john smith Instrument Flight Rules 36 September 9th 04 03:37 PM
Timing light for electronic ignition Ron Home Built 4 August 20th 04 05:18 PM
internal timing of slick magneto Jerry Jensen Home Built 1 June 25th 04 07:59 PM
Timing on Subaru EJ22 ??? Randy Rotorcraft 1 November 9th 03 06:15 AM


All times are GMT +1. The time now is 05:59 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.