![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
Rob wrote:
figured that one out. Also, when I go to the "nearest airports" page, it's always empty. Not a major inconvenience yet, but I'd like the information to be there should I really need it someday. I am unaware of how to reset the entire unit to factory defaults, but I am aware that you can reset the "Nearest Airport Criteria" to factory defaults (0 feet runway length and ANY surface) by going to the AUX chapter (or what the GNS430 pilot's manual calls "page groupings"), page 4. To get to this page, hold the CLR button for three seconds, which will take you to the NAV chapter, page 1. Roll the large, right knob two clicks to the right to take you to the AUX chapter. Roll the small right knob (inner knob) right three clicks to the AUX page 4, which is labeled "Setup 2." Press the right inner knob to turn on the cursor to highlight a menu choice, use the large right knob to scroll to the "Nearest Airport Criteria" choice, then hit the ENT key. Now, press the MENU key to display the individual menu, scroll to "Restore Defaults," and press ENT. That will restore the factory defaults for the Nearest Airport Criteria. -- Peter ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#2
|
|||
|
|||
![]()
"Peter R." wrote:
I am unaware of how to reset the entire unit to factory defaults, but I am aware that you can reset the "Nearest Airport Criteria" to factory defaults By the way, I believe all pages that are customizable can be reset to their defaults by selecting the "Restore Defaults" menu choice from the page-specific menu. -- Peter ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#3
|
|||
|
|||
![]() Peter R. wrote: "Peter R." wrote: I am unaware of how to reset the entire unit to factory defaults, but I am aware that you can reset the "Nearest Airport Criteria" to factory defaults By the way, I believe all pages that are customizable can be reset to their defaults by selecting the "Restore Defaults" menu choice from the page-specific menu. -- Peter Frank S. has instructions for resetting factory defaults above. I'll take a look at the nearest airports criteria before I reset and I'll bet that's the problem. Thanks for the tips Peter. -R |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Washington DC airspace closing for good? | tony roberts | Piloting | 153 | August 11th 05 12:56 AM |
P-3C Ditches with Four Engines Out, All Survive! | Scet | Military Aviation | 6 | September 27th 04 01:09 AM |
p3/95 | [email protected] | Military Aviation | 1 | September 27th 04 12:27 AM |
B29 tail serial number Tarakan WW2 | Joanne Smedley | Military Aviation | 6 | August 13th 03 02:11 PM |