|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
|
#1
November 3rd 06, 05:26 PM
|
|||
|
|||
Got my pin-diagram from Juan Jimenez today, THANX
 This is how it looks: TERRA TRT-250 TRANSPONDER *17 - A2 *5 - A1 *15 - B1 *2 - B2 *14 - B4 *18 - C4 *16 - A4 *3 - C1 *4 - C2 *9 - D4 *1 - SUPPRESSION OUT *8 and 20 - SWITCHED POWER OUT *6 - EXT. DME SUPPRESSION IN *7 and 19 - POWER IN 12 VDC *11 and 21 - POWER GROUND *12 and 24 - REMOTE GROUND Cabel lengths: RG-58A/U - max 9 ft. RG-8A/U - 17 ft. 
|
|
#2
November 5th 06, 11:31 AM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Pinout for TERRA TRT-250 transponder
Turaga wrote:
Got my pin-diagram from Juan Jimenez today, THANX This is how it looks: TERRA TRT-250 TRANSPONDER *17 - A2 *5 - A1 *15 - B1 *2 - B2 *14 - B4 *18 - C4 *16 - A4 *3 - C1 *4 - C2 *9 - D4 *1 - SUPPRESSION OUT *8 and 20 - SWITCHED POWER OUT *6 - EXT. DME SUPPRESSION IN *7 and 19 - POWER IN 12 VDC *11 and 21 - POWER GROUND *12 and 24 - REMOTE GROUND Cabel lengths: RG-58A/U - max 9 ft. RG-8A/U - 17 ft. -- Turaga Turaga, Did you know there is an old AD on those?http://www.airweb.faa.gov/Regulatory...3?OpenDocument
|
|
#3
November 5th 06, 01:59 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Pinout for TERRA TRT-250 transponder
"Earls61" wrote in message oups.com... Turaga, Did you know there is an old AD on those?http://www.airweb.faa.gov/Regulatory...3?OpenDocument If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the fix required by the AD. Gerry
|
|
#4
November 5th 06, 04:10 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Pinout for TERRA TRT-250 transponder
"Gerry Caron" wrote in message ... "Earls61" wrote in message oups.com... Turaga, Did you know there is an old AD on those?http://www.airweb.faa.gov/Regulatory...3?OpenDocument If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the fix required by the AD. Gerry Beat me to it. And the way to check the mod is to look for the label with the serial number, the mod level is determined by looking at which number has been taken off the sticker, or marked. -- Posted via a free Usenet account from http://www.teranews.com
|
|
#6
November 6th 06, 11:59 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
|
Pinout for TERRA TRT-250 transponder
Should be.
"Turaga" wrote in message ... **************************** Mine has the number five taken out, and it has just been at service and yellow-taged. So it should be ok, then I guess... Tor, Norway ***************************** Juan Jimenez Wrote: "Gerry Caron" wrote in message ...- "Earls61" wrote in message oups.com...- Turaga, Did you know there is an old AD on those?http://tinyurl.com/y5dgsh - If you have a TRT-250 with Mod 5 or a TRT-250D with Mod 2 it has the fix required by the AD. Gerry- Beat me to it. And the way to check the mod is to look for the label with the serial number, the mod level is determined by looking at which number has been taken off the sticker, or marked. -- Posted via a free Usenet account from http://www.teranews.com -- Turaga -- Posted via a free Usenet account from http://www.teranews.com
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wanted pinout for KT78 transponder. | [email protected] | Owning | 1 | February 21st 06 04:34 AM |
| Operation without a transponder | flyer | Piloting | 11 | September 14th 04 08:48 AM |
| PINOUT NEEDED - ARC Transponder | log | General Aviation | 1 | August 31st 04 03:14 AM |
| Transponder test after static system opened? | Jack I | Owning | 6 | March 14th 04 03:09 PM |
| More on transponder petition | Ian Cant | Soaring | 1 | February 27th 04 06:37 PM |
Hybrid Mode
