"All-terrain" main wheel dolly

At 06:52 18 December 2014, Bastoune wrote:
All,
Thanks for the inputs.=20

Frank - If I picture what you are describing, the glider is rolled onto a
d=
ish that somehow holds the main wheel. There are two 10" wheels that are
of=
fset from the dish and connected to a handle. By applying pressure down
on
=
the handle, the dish is lifted (almost like a hand truck) and the glider
be=
comes mobile. I assume that this contraption is all metal, correct? How
lon=
g was the handle approximately? Thanks B.

We used these for many years for hangar packing too. The whole thjng
was steel and the handles were around 12 feet. The main wheel sat in a
ring. There were many trailing edge dings to the wings over the years from

the handles so we switched to main wheel dollies.

John Galloway