https://www.aopa.org/news-and-media/all-news/2016/july/26/faa-restores-birthday-solos?

Here are a couple of links from my latest project. The sailplane is a Richard Schreder HP-18 kit from the 70's that I built over the last 4 to 5 years. I am using twin Jetcat P300 turbines for self-launch and sustained flight. There are numerous modifications that have been incorporated into the...

Hello All, I recently purchased an ASW19 and unfortunately it did not include a tail dolly. Therefore, I was wondering if anyone knows if an ASW20 tail dolly would fit on an ASW19. I've heard rumblings that their fuselages are very similar (if not the same). Has anyone had any experience with...

I was recently towed by a tow plane that had no mirror installed. Two way communication was established using VHF and a club member was positioned ahead of the tow plane to relay ground signals. This was a US based club. This launch prompted me to wonder if in the US a mirror is actually...

so I made the ultimate dumb move - I updated a working IT device right before I went to a contest. It has not worked since......... To be fair - I did not update the firmware correct off the bat (should have ready the Manuel better) Now - on the ground it looks like it will work fine - as soon...

I just bought mosquito 303 and there is an 6x8 inch Inspection hole behind main gear is that factory.

I have a wing holder/assembly thing for sale (notice i did not say wing rigger). It is used but works fine. I bought it from Tim at W&W a few years back. I am asking $500. I can bring it to Uvalde for the sports class contest. Reason for selling: I got a different glider and it came with a...

I may need a backup soaring program. I'm having trouble with my Oudie. Is there a flight software out there that I can download on my iphone? Dennis

Practically new. Does not fit my glider. Large size and 140 lb strut. Paid over $1200. Will Sell for best offer plus shipping.

As more & more pilots are aquiring self-launching or touring motorgliders they may find themselves flying from fields with private jet or tanker traffic. Last weekend I was taxing my ASH-26e out to take-off from end of 34 at Minden. Most gliders are towed off of 30 so this usually isn't even an...

A novice question for the skymasters. When ballasting my Schleicher should I completely remove the plastic cover-plate over the drain on the undersurface of the wing, or should I leave the cover attached with the tape hinge at the front and detached at the rear with cover-plate hanging down knowing...

NEW/OLD Book Workshop Practice - for building and repairing wooden gliders and sailplanes Details: http://www.cumulus-soaring.com/books/WorkshopPractice/WorkshopPractice.htm Overview After 25 years of hard work, the Vintage Sailplane Association is excited to release the English translation of...

I have a NOS Cambridge variometer that uses an optional audio unit (au 22, or au 23)I think an au 20 would work. If anyone has this unit I am interested to buy

Our club has a Delcom Air 960 panel mounted in a Schweizer 2-33. Currently we are using a speaker-mike which jacks into the front of the radio. We would like to wire the radio with a speaker and two microphones. Does anyone know if this configuration is possible with this radio? If so, could...

Hi, I'm looking for an electronic copy of the schematics for the Dittel Fsg-5 handheld VHF radio. Could anyone help me with it ? Bruno

Have trouble finding a 12x4 also known as a 300x100 tube and tire for my Atlas 10m motor glider. Does any one have one for sale or know where I can find one? I've tried Wings & Wheels, Aircraft Spruce, and Desser. Thanks for your help Steve Loudon 308-746-1950

Can you fly a Stemme s10 in the USA with a glider licence and self launching endorsement ? Dan

Hello, I am selling my CAI 302, good working order, currently installed in the glider. No 303 display. Asking price $1000 USD Also available Peter Masak LiftDetector 200, asking price $350 If interested please contact me directly. luke "at" silentflight "dot" ca Luke Szczepaniak

Koen, thanks for the continued updates. Great app and getting better.

Apparently the new Stemme S12 has a great handicap. A fantastic selling point for Stemme. Jim