A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Removing JB Weld?



 
 
Thread Tools Display Modes
  #1  
Old July 15th 04, 10:34 PM
Dave S
external usenet poster
 
Posts: n/a
Default



Or a really big CO2 cartridge. An upside down can of air like used for
dusting out computers held upside down will squirt liquid CO2 at around -100
F. If you try this wear a very thick and well padded glove.

Tony


Liquid CO2? Are you sure that those computer dusting cartridges arent
using some sort of flourocarbons?





I've heard this old saw so often even I was beginning to believe it.
While it is based on fact, it's not seriously practical.

When released (in)correctly, it is true that a CO2 extinguisher will
make a pile of dry ice. But it's a very small pile compared to the
amount of CO2 gas released. It would have to be a Very Very Big (TM)
can in order to chill a that big of a slug of steel to below 0.



Discharging a CO2 extinguisher does not generate dry ice. The
expansional cooling of the compressed gas causes moisture in the air to
condense and freeze. The ice generated is the typical wet variety. Check
your sources.


Simple thermodynamics, dudes.


Sounds oversimplified.



Richard (woolly coat and all) Lamb


Dave

  #2  
Old July 16th 04, 12:34 AM
Anthony
external usenet poster
 
Posts: n/a
Default


"Dave S" wrote in message
nk.net...


Or a really big CO2 cartridge. An upside down can of air like used for
dusting out computers held upside down will squirt liquid CO2 at

around -100
F. If you try this wear a very thick and well padded glove.

Tony


Liquid CO2? Are you sure that those computer dusting cartridges arent
using some sort of flourocarbons?


Yep, chlorofluorocarbons are banned.

Tony


  #3  
Old July 16th 04, 05:41 AM
G EddieA95
external usenet poster
 
Posts: n/a
Default

Liquid CO2? Are you sure that those computer dusting cartridges arent
using some sort of flourocarbons?


Yep, chlorofluorocarbons are banned.


It isn't CO2, (or pressurised nitrogen). It's hydrocarbon. Read one of those
cans, there will be a fire warning.
  #4  
Old July 17th 04, 12:26 AM
Blueskies
external usenet poster
 
Posts: n/a
Default

Yes, some sort of propane...

--
Dan D.
http://www.ameritech.net/users/ddevillers/start.html


..
"G EddieA95" wrote in message ...
Liquid CO2? Are you sure that those computer dusting cartridges arent
using some sort of flourocarbons?


Yep, chlorofluorocarbons are banned.


It isn't CO2, (or pressurised nitrogen). It's hydrocarbon. Read one of those
cans, there will be a fire warning.



  #6  
Old July 17th 04, 07:33 AM
G EddieA95
external usenet poster
 
Posts: n/a
Default


Yes, some sort of propane...


Not to pick a nit, but there's only one propane: C3H8 just as there's only
one
octane: C8H8.


Octane is C8H18.

And there are substituted propanes.
  #8  
Old July 16th 04, 06:45 AM
jls
external usenet poster
 
Posts: n/a
Default


"Anthony" wrote in message
...

"Dave S" wrote in message
nk.net...


Or a really big CO2 cartridge. An upside down can of air like used

for
dusting out computers held upside down will squirt liquid CO2 at

around -100
F. If you try this wear a very thick and well padded glove.

Tony


Liquid CO2? Are you sure that those computer dusting cartridges arent
using some sort of flourocarbons?


Yep, chlorofluorocarbons are banned.

Tony

You can still buy Halon fire extinguishers. The manufacture of the halogen
compounds is now banned but existing stores may still be sold.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is JB Weld electrically conductive? Scott Home Built 14 July 12th 04 11:24 PM
JB Weld or Hi Temp RTV silicone oil crack fix. Paul Lee Home Built 7 July 12th 04 03:12 PM
What is best "JB Weld" type epoxy putty? [email protected] Home Built 4 March 8th 04 07:45 AM
Tube Cluster Weld Question Dick Home Built 6 January 17th 04 12:10 AM
Removing Aerothane Yosimite Sam Home Built 1 October 18th 03 03:30 PM


All times are GMT +1. The time now is 04:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.